NF EN ISO 22391-2

NF EN ISO 22391-2

January 2010
Standard Current

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes

ISO 22391-2:2009 specifies the characteristics of pipe made of polyethylene of raised temperature resistance (PE-RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic systems) and for heating systems, under the design pressures and temperatures appropriate to the class of application according to ISO 22391-1.ISO 22391-2:2009 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parameters and test methods. When used in conjunction with the other parts of ISO 22391, it is applicable to PE-RT pipes, fittings, their joints, and to joints having components of PE-RT, as well as of other plastics and non-plastics materials, respectively, used for hot and cold water installations.It is applicable to pipes with or without a barrier layer or layers.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2010

Number of pages

22 p.

Reference

NF EN ISO 22391-2

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems
93.025   External water conveyance systems

Classification index

T54-982-2

Print number

1 - 18/01/2010

International kinship

ISO 22391-2:2009

European kinship

EN ISO 22391-2:2009
Sumary
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes

ISO 22391-2:2009 specifies the characteristics of pipe made of polyethylene of raised temperature resistance (PE-RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic systems) and for heating systems, under the design pressures and temperatures appropriate to the class of application according to ISO 22391-1.

ISO 22391-2:2009 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parameters and test methods. When used in conjunction with the other parts of ISO 22391, it is applicable to PE-RT pipes, fittings, their joints, and to joints having components of PE-RT, as well as of other plastics and non-plastics materials, respectively, used for hot and cold water installations.

It is applicable to pipes with or without a barrier layer or layers.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions, symboles et abréviations
    2
  • 4 Matériau
    2
  • 4.1 Matériau des tubes
    2
  • 4.2 Évaluation des valeurs sigma LPL
    2
  • 4.3 Influence sur l'eau destinée à la consommation humaine
    5
  • 5 Caractéristiques générales
    5
  • 5.1 Aspect
    5
  • 5.2 Opacité
    5
  • 6 Caractéristiques géométriques
    5
  • 6.1 Généralités
    5
  • 6.2 Dimensions des tubes
    6
  • 7 Caractéristiques mécaniques
    9
  • 8 Caractéristiques chimiques et physiques
    10
  • 9 Exigences d'aptitude à l'emploi
    10
  • 10 Marquage
    10
  • 10.1 Exigences générales
    10
  • 10.2 Marquage minimal exigé
    11
  • Annexe A (informative) Détermination de la valeur maximale calculée du tube, Scalc, max
    12
  • Bibliographie
    14
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ