NF EN ISO 23161

NF EN ISO 23161

October 2011
Standard Cancelled

Soil quality - Determination of selected organotin compounds - Gas-chromatographic method

ISO 23161:2009 specifies a gas-chromatographic method for the identification and quantification of organotin compounds (OTCs) in soils as specified in Table 1. The method is also applicable to samples from sediments, sludges and wastes (soil-like materials). The working range depends on the detection technique used and the amount of sample taken for analysis. The limit of quantification for each compound is about 10 µg/kg.Organotin cations can only be determined in accordance with ISO 23161:2009 after derivatization. The anionic part bound to the organotin cation is mainly dependent on the chemical environment and is not determined using this method. The peralkylated organotin compounds behave in a completely different way from their parent compounds. Tetraalkylated organotin compounds which are already peralkylated, such as tetrabutyltin, are determined directly without derivatization.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2011

Number of pages

37 p.

Reference

NF EN ISO 23161

ICS Codes

13.080.10   Chemical characteristics of soils

Classification index

X31-441

Print number

1 - 19/09/2011

International kinship

European kinship

EN ISO 23161:2011
Sumary
Soil quality - Determination of selected organotin compounds - Gas-chromatographic method

ISO 23161:2009 specifies a gas-chromatographic method for the identification and quantification of organotin compounds (OTCs) in soils as specified in Table 1. The method is also applicable to samples from sediments, sludges and wastes (soil-like materials). The working range depends on the detection technique used and the amount of sample taken for analysis. The limit of quantification for each compound is about 10 µg/kg.

Organotin cations can only be determined in accordance with ISO 23161:2009 after derivatization. The anionic part bound to the organotin cation is mainly dependent on the chemical environment and is not determined using this method. The peralkylated organotin compounds behave in a completely different way from their parent compounds. Tetraalkylated organotin compounds which are already peralkylated, such as tetrabutyltin, are determined directly without derivatization.

Replaced standards (1)
NF ISO 23161
November 2009
Standard Cancelled
Soil quality - Determination of selected organotin compounds - Gas-chromatographic method

ISO 23161:2009 specifies a gas-chromatographic method for the identification and quantification of organotin compounds (OTCs) in soils as specified in Table 1. The method is also applicable to samples from sediments, sludges and wastes (soil-like materials). The working range depends on the detection technique used and the amount of sample taken for analysis. The limit of quantification for each compound is about 10 µg/kg. Organotin cations can only be determined in accordance with ISO 23161:2009 after derivatization. The anionic part bound to the organotin cation is mainly dependent on the chemical environment and is not determined using this method. The peralkylated organotin compounds behave in a completely different way from their parent compounds. Tetraalkylated organotin compounds which are already peralkylated, such as tetrabutyltin, are determined directly without derivatization.

Standard replaced by (1)
NF EN ISO 23161
November 2018
Standard Current
Soil quality - Determination of selected organotin compounds - Gas-chromatographic method

This document specifies a gas-chromatographic method for the identification and quantification of organotin compounds (OTCs) in soils as specified in Table 1. This document is also applicable to samples from sediments, sludges and wastes (soil-like materials). The working range depends on the detection technique used and the amount of sample taken for analysis. The limit of quantification for each compound is about 10 µg/kg.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    2
  • 4 Principe
    3
  • 5 Réactifs
    4
  • 5.1 Généralités
    4
  • 5.2 Produits chimiques
    5
  • 5.3 Étalons
    5
  • 5.4 Préparation des réactifs et des solutions
    6
  • 5.5 Purification
    7
  • 6 Appareillage
    8
  • 6.1 Exigences générales
    8
  • 6.2 Appareillage d'échantillonnage
    8
  • 6.3 Appareillage supplémentaire
    9
  • 7 Mode opératoire
    9
  • 7.1 Échantillonnage et prétraitement des échantillons
    9
  • 7.2 Extraction de l'échantillon
    10
  • 7.3 Purification de l'extrait
    11
  • 7.4 Détermination de la masse sèche
    12
  • 7.5 Mesurage
    12
  • 8 Étalonnage
    13
  • 9 Taux de récupération des composés étalons internes
    14
  • 10 Quantification
    14
  • 11 Expression des résultats
    15
  • 12 Fidélité
    15
  • 13 Rapport d'essai
    15
  • Annexe A (informative) Informations sur le mode opératoire
    16
  • Annexe B (informative) Modes opératoires de purification supplémentaires
    18
  • Annexe C (informative) Informations concernant les conditions instrumentales types
    21
  • Annexe D (informative) Informations concernant l'identification GC-MS
    32
  • Annexe E (informative) Données de validation
    34
  • Bibliographie
    38
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ