NF EN ISO 28802

NF EN ISO 28802

May 2012
Standard Current

Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

This International Standard provides an environmental survey method for the assessment of the comfort andwell-being of occupants of indoor and outdoor environments. It is not restricted to any particular environment,but provides the general principles that allow assessment and evaluation.It presents the principles for conducting an environmental survey to assess the comfort and well-being of peoplein environments. It gives guidance on the design of the survey, as well as on the environmental measurementsused to quantify the environment and the subjective assessment methods used to quantify the occupants'responses to that environment. It does not provide guidance on the design of subjective scales.It is applicable to built as well as other environments, including vehicle and outdoor environments, and to allthe occupants of those environments who can be considered as providing valid responses to an environmentalsurvey. There may be specific features of certain types of environment that have to be taken into account;however, the general principles it outlines will apply.This International Standard is not restricted to specific environmental components. It includes assessment ofthermal environments, the acoustic environment, the visual and lit environment, air quality and other environmentalfactors that could be considered to influence the comfort and well-being of the occupants of an environment.It is a basic ergonomics standard which can contribute to the development of standards concerned with specificenvironments such as those found in buildings. It is intended to be used by people involved in the generalassessment and evaluation of physical environments, including general ergonomics practitioners as well asthose who develop standards and guidelines for specific applications.NOTE The results of the environmental survey produced by the application of this International Standard may identifyspecific problems that require expert advice.

View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Sécurité, Silver économie, Gestion des risques et SST, Accessibilité, QSE

Publication date

May 2012

Number of pages

29 p.

Reference

NF EN ISO 28802

ICS Codes

13.180   Ergonomics

Classification index

X35-610

Print number

1 - 27/04/2012

International kinship

European kinship

EN ISO 28802:2012
Sumary
Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

This International Standard provides an environmental survey method for the assessment of the comfort and

well-being of occupants of indoor and outdoor environments. It is not restricted to any particular environment,

but provides the general principles that allow assessment and evaluation.

It presents the principles for conducting an environmental survey to assess the comfort and well-being of people

in environments. It gives guidance on the design of the survey, as well as on the environmental measurements

used to quantify the environment and the subjective assessment methods used to quantify the occupants'

responses to that environment. It does not provide guidance on the design of subjective scales.

It is applicable to built as well as other environments, including vehicle and outdoor environments, and to all

the occupants of those environments who can be considered as providing valid responses to an environmental

survey. There may be specific features of certain types of environment that have to be taken into account;

however, the general principles it outlines will apply.

This International Standard is not restricted to specific environmental components. It includes assessment of

thermal environments, the acoustic environment, the visual and lit environment, air quality and other environmental

factors that could be considered to influence the comfort and well-being of the occupants of an environment.

It is a basic ergonomics standard which can contribute to the development of standards concerned with specific

environments such as those found in buildings. It is intended to be used by people involved in the general

assessment and evaluation of physical environments, including general ergonomics practitioners as well as

those who develop standards and guidelines for specific applications.

NOTE The results of the environmental survey produced by the application of this International Standard may identify

specific problems that require expert advice.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et symboles
    2
  • 4 Conception de l'enquête environnementale
    2
  • 4.1 Objectif de l'enquête
    2
  • 4.2 Mesure de l'environnement physique
    2
  • 4.3 Mesure des réponses subjectives
    3
  • 4.4 Où mesurer?
    3
  • 4.5 Quoi mesurer?
    4
  • 4.6 Quand mesurer?
    4
  • 4.7 Combien de personnes et qui?
    4
  • 4.8 Possibilités d'adaptation
    5
  • 5 Mesure des ambiances thermiques
    5
  • 5.1 Mesures physiques
    5
  • 5.2 Mesures subjectives
    5
  • 5.3 Observation/évaluation
    8
  • 6 Mesure de l'environnement acoustique
    8
  • 6.1 Mesures physiques
    8
  • 6.2 Mesures subjectives
    8
  • 6.3 Observation/évaluation
    9
  • 7 Mesure de l'environnement visuel et de l'éclairage
    9
  • 7.1 Mesures physiques
    9
  • 7.2 Mesures subjectives
    10
  • 7.3 Observation/évaluation
    11
  • 8 Mesure de la qualité de l'air
    11
  • 8.1 Mesures physiques
    11
  • 8.2 Mesures subjectives
    11
  • 8.3 Observation/évaluation
    12
  • 9 Mesure de l'environnement vibratoire
    12
  • 9.1 Mesures physiques
    12
  • 9.2 Mesures subjectives
    12
  • 9.3 Observation/évaluation
    13
  • 10 Autres facteurs environnementaux
    13
  • Annexe A (informative) Exemple d'enquête environnementale dans un bâtiment
    14
  • Bibliographie
    20
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ