NF EN ISO 28927-6

NF EN ISO 28927-6

August 2010
Standard Current

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 : rammers

ISO 28927-6:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven rammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.ISO 28927-6:2009 is applicable to rammers, back-fill rammers, pawing rammers, sand rammers and stampers, driven pneumatically or by other means, intended for use in foundries, on building sites, etc., and with, for example, butts or peens made of cast iron or rubber, used for ramming of casting sand or in stamping work.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Gestion des risques et SST, QSE, Sécurité

Publication date

August 2010

Number of pages

26 p.

Reference

NF EN ISO 28927-6

ICS Codes

13.160   Vibration and shock with respect to human beings
17.160   Vibrations, shock and vibration measurements
25.140.10   Pneumatic tools
25.140.20   Electric tools

Classification index

E90-321-6

Print number

1 - 19/08/2010

International kinship

ISO 28927-6:2009

European kinship

EN ISO 28927-6:2009
Sumary
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 : rammers

ISO 28927-6:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven rammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.

ISO 28927-6:2009 is applicable to rammers, back-fill rammers, pawing rammers, sand rammers and stampers, driven pneumatically or by other means, intended for use in foundries, on building sites, etc., and with, for example, butts or peens made of cast iron or rubber, used for ramming of casting sand or in stamping work.

Replaced standards (1)
NF EN ISO 8662-9
January 1997
Standard Cancelled
Hand-held portable power tools. Measurement of vibrations at the handle. Part 9 : rammers.

Table of contents
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et symboles
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles
    2
  • 4 Normes de référence et code d'essai de vibrations
    2
  • 5 Description de la famille de machines
    2
  • 6 Caractérisation des vibrations
    4
  • 6.1 Direction du mesurage
    4
  • 6.2 Emplacement des mesurages
    4
  • 6.3 Amplitude des vibrations
    5
  • 6.4 Combinaison des directions de vibrations
    5
  • 7 Exigences pour l'appareillage
    5
  • 7.1 Généralités
    5
  • 7.2 Montage des transducteurs
    5
  • 7.3 Filtre de pondération fréquentielle
    6
  • 7.4 Durée d'intégration
    6
  • 7.5 Équipement auxiliaire
    6
  • 7.6 Étalonnage
    6
  • 8 Conditions d'essai et de fonctionnement de la machine
    6
  • 8.1 Généralités
    6
  • 8.2 Conditions de fonctionnement
    7
  • 8.3 Autres valeurs à spécifier
    7
  • 8.4 Équipement accessoire, pièce et tâche
    7
  • 8.5 Opérateur
    9
  • 9 Mode opératoire de mesure et validation
    9
  • 9.1 Valeurs de vibrations consignées
    9
  • 9.2 Déclaration et vérification de la valeur d'émission vibratoire
    9
  • 10 Rapport d'essai
    10
  • Annexe A (informative) Modèle de rapport d'essai pour les émissions de vibrations des marteaux fouloirs
    11
  • Annexe B (normative) Détermination de l'incertitude
    13
  • Annexe C (normative) Conception de l'absorbeur d'énergie pour les marteaux fouloirs
    15
  • Bibliographie
    16
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ