NF EN ISO 28927-8

NF EN ISO 28927-8

August 2010
Standard Current

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action

ISO 28927-8:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. ISO 28927-8:2009 is applicable to reciprocating files intended for surface finishing equipped with a file or polishing tool, saws intended for parting sheets, plaster for medical use or wood, or equipped with a saw blade for use on all kinds of materials, and small circular saws primarily intended for cutting metal or composite materials, whether driven pneumatically or by other means. It is not applicable to files that are normally used with one hand on the file blade, nor to large circular saws intended for cutting wood.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Gestion des risques et SST, QSE, Sécurité

Publication date

August 2010

Number of pages

34 p.

Reference

NF EN ISO 28927-8

ICS Codes

13.160   Vibration and shock with respect to human beings
25.100.40   Saws
25.140.10   Pneumatic tools

Classification index

E90-321-8

Print number

1 - 19/08/2010

International kinship

ISO 28927-8:2009

European kinship

EN ISO 28927-8:2009
Sumary
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action

ISO 28927-8:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.

ISO 28927-8:2009 is applicable to reciprocating files intended for surface finishing equipped with a file or polishing tool, saws intended for parting sheets, plaster for medical use or wood, or equipped with a saw blade for use on all kinds of materials, and small circular saws primarily intended for cutting metal or composite materials, whether driven pneumatically or by other means. It is not applicable to files that are normally used with one hand on the file blade, nor to large circular saws intended for cutting wood.

Replaced standards (1)
NF EN ISO 8662-12
April 1999
Standard Cancelled
Hand-held portable power tools. Measurement of vibrations at the handle. Part 12 : saws and files with reciprocating action and saws with oscillating or rotating action.

Le présent document s'inscrit dans une série de normes sur le mesurage des vibrations au niveau des poignées des machines à moteur portatives. Il concerne les scies et limes sauteuses et à mouvement oscillant, alternatif ou rotatif.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    VI
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et symboles
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles
    2
  • 4 Normes de référence et code d'essai de vibrations
    3
  • 5 Description de la famille de machines
    3
  • 6 Caractérisation des vibrations
    6
  • 6.1 Direction du mesurage
    6
  • 6.2 Emplacement des mesurages
    6
  • 6.3 Amplitude des vibrations
    11
  • 6.4 Combinaison des directions de vibrations
    11
  • 7 Exigences pour l'appareillage
    11
  • 7.1 Généralités
    11
  • 7.2 Montage des transducteurs
    11
  • 7.3 Filtre de pondération fréquentielle
    11
  • 7.4 Durée d'intégration
    12
  • 7.5 Équipement auxiliaire
    12
  • 7.6 Étalonnage
    12
  • 8 Conditions d'essai et de fonctionnement de la machine
    12
  • 8.1 Généralités
    12
  • 8.2 Conditions de fonctionnement
    12
  • 8.3 Autres valeurs à spécifier
    13
  • 8.4 Équipement accessoire, pièce et tâche
    13
  • 8.5 Opérateur
    17
  • 9 Mode opératoire de mesure et validation
    17
  • 9.1 Valeurs de vibrations consignées
    17
  • 9.2 Déclaration et vérification des valeurs d'émission vibratoire
    18
  • 10 Rapport d'essai
    18
  • Annexe A (informative) Modèle de rapport d'essai pour les émissions de vibrations des scies et des limes
    20
  • Annexe B (normative) Détermination de l'incertitude
    22
  • Bibliographie
    24
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ