NF EN ISO 3452-2

NF EN ISO 3452-2

January 2014
Standard Cancelled

Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials

ISO 3452-2:2013 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. ISO 3452-2:2013 covers the temperature range 10 °C to 50 °C. Additional tests in ISO 3452-5:2008 or ISO 3452-6:2008 may be required outside this range.On-site control tests and methods are detailed in ISO 3452‑1:2013.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2014

Number of pages

33 p.

Reference

NF EN ISO 3452-2

ICS Codes

19.100   Non-destructive testing

Classification index

A09-120-2

Print number

1 - 27/12/2013

International kinship

ISO 3452-2:2013

European kinship

EN ISO 3452-2:2013
Sumary
Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials

ISO 3452-2:2013 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. ISO 3452-2:2013 covers the temperature range 10 °C to 50 °C. Additional tests in ISO 3452-5:2008 or ISO 3452-6:2008 may be required outside this range.

On-site control tests and methods are detailed in ISO 3452‑1:2013.

Replaced standards (1)
NF EN ISO 3452-2
September 2007
Standard Cancelled
Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials

Le présent document définit les exigences techniques et les modes opératoires d'essai applicables aux produits de ressuage dans le cadre des essais de type et de lot. Il détaille également les essais et méthodes d'essai de contrôle sur site.

Standard replaced by (1)
NF EN ISO 3452-2
June 2021
Standard Current
Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials

This document specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This document covers the temperature range from 10 °C to 50 °C. Additional tests in ISO 3452-5 or ISO 3452-6 can be required outside this range. On-site control tests and methods are detailed in ISO 3452‑1.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Classification
    2
  • 4.1 Produits d'essai
    2
  • 4.2 Niveaux de sensibilité
    2
  • 5 Essai des produits de ressuage
    3
  • 5.1 Personnel
    3
  • 5.2 Équipements d'essai
    3
  • 5.3 Rapport d'essai
    4
  • 5.4 Essais
    4
  • 6 Méthodes d'essai et exigences
    6
  • 6.1 Aspect
    6
  • 6.2 Sensibilité du système de ressuage
    6
  • 6.3 Masse volumique
    12
  • 6.4 Viscosité
    12
  • 6.5 Point d'éclair
    12
  • 6.6 Lavabilité (pour les pénétrants de la Méthode A)
    12
  • 6.7 Intensité de fluorescence
    13
  • 6.8 Stabilité aux UV
    13
  • 6.9 Stabilité thermique de l'intensité de fluorescence
    14
  • 6.10 Tolérance à l'eau
    14
  • 6.11 Caractéristiques corrosives
    15
  • 6.12 Teneur en soufre et en halogènes (pour les produits désignés à faible teneur en soufre et halogènes)
    18
  • 6.13 Résidu après évaporation/teneur en solides
    19
  • 6.14 Tolérance en pénétrant
    19
  • 6.15 Performances du révélateur
    19
  • 6.16 Redispersibilité
    20
  • 6.17 Masse volumique du liquide porteur
    20
  • 6.18 Performances du produit (récipients sous pression)
    20
  • 6.19 Distribution granulométrique
    20
  • 6.20 Teneur en eau
    20
  • 7 Emballage et étiquetage
    21
  • Annexe A (normative) Comparaison de l'intensité de fluorescence
    22
  • Annexe B (informative) Équipement pour la détermination de la visibilité des indications fluorescentes
    24
  • Bibliographie
    25
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ