NF EN ISO 5173

NF EN ISO 5173

August 2010
Standard Cancelled

Destructive tests on welds in metallic materials - Bend tests

ISO 5173:2009 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen.In addition ISO 5173:2009 specifies a method for making longitudinal root and face bend tests to be used instead of transverse bend tests for heterogeneous assemblies when base materials and/or filler metal have a significant difference in their physical and mechanical properties in relation to bending.ISO 5173:2009 applies to metallic materials in all forms of product with welded joints made by any fusion arc welding process.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2010

Number of pages

25 p.

Reference

NF EN ISO 5173

ICS Codes

25.160.40   Welded joints and welds

Classification index

A89-203

Print number

1 - 16/07/2010

International kinship

ISO 5173:2009

European kinship

EN ISO 5173:2010
Sumary
Destructive tests on welds in metallic materials - Bend tests

ISO 5173:2009 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen.

In addition ISO 5173:2009 specifies a method for making longitudinal root and face bend tests to be used instead of transverse bend tests for heterogeneous assemblies when base materials and/or filler metal have a significant difference in their physical and mechanical properties in relation to bending.

ISO 5173:2009 applies to metallic materials in all forms of product with welded joints made by any fusion arc welding process.

Replaced standards (1)
NF EN 910
May 1996
Standard Cancelled
Destructive tests on welds in metallic materials. Bend tests.

Ce document spécifie une méthode d'essai de pliage dans les assemblages bout à bout ainsi que les dimensions et le mode de prélèvement des éprouvettes.

Standard replaced by (1)
NF EN ISO 5173
January 2023
Standard Current
Destructive tests on welds in metallic materials - Bend tests

This document specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to reveal imperfections on or near the surface of the test specimen which is under tension during bend testing and/or assess ductility. It also gives the dimensions of the test specimen. In addition, this document specifies methods to be used instead of transverse bend tests with a former for welded joints when base materials, heat affected zones and/or weld metal have a significant difference in their physical and mechanical properties in relation to bending. This document applies to metallic materials in all forms of product with welded joints made by any welding process.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Termes et définitions
    1
  • 3 Principe
    2
  • 4 Symboles et termes abrégés
    2
  • 4.1 Symboles
    2
  • 4.2 Termes abrégés
    3
  • 4.3 Figures correspondent aux abréviations
    4
  • 5 Préparation des éprouvettes
    6
  • 5.1 Généralités
    6
  • 5.2 Sens de prélèvement
    6
  • 5.3 Marquage
    7
  • 5.4 Traitement thermique et/ou vieillissement
    7
  • 5.5 Prélèvement
    7
  • 5.6 Taille des éprouvettes
    7
  • 6 Conditions d'essai
    11
  • 6.1 Attaque chimique
    11
  • 6.2 Essais
    11
  • 6.3 Diamètre du poinçon et du rouleau
    17
  • 6.4 Distance entre les rouleaux
    17
  • 6.5 Angle de pliage
    17
  • 6.6 Allongement au pliage
    17
  • 7 Résultats d'essai
    18
  • 8 Rapport d'essai
    18
  • Annexe A (informative) Exemple d'un rapport d'essai
    19
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ