NF EN ISO 5395-3

NF EN ISO 5395-3

November 2013
Standard Current

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3 : ride-on lawnmowers with seated operator

ISO 5395-3:2013 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.ISO 5395-3:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.It is not applicable to lawnmowers which are manufactured before the date of publication of this document.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2013

Number of pages

56 p.

Reference

NF EN ISO 5395-3

ICS Codes

65.060.70   Horticultural equipment

Classification index

U15-135-3

Print number

1 - 31/10/2013

International kinship

ISO 5395-3:2013

European kinship

EN ISO 5395-3:2013
Sumary
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3 : ride-on lawnmowers with seated operator

ISO 5395-3:2013 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.

It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.

ISO 5395-3:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.

It is not applicable to lawnmowers which are manufactured before the date of publication of this document.

Replaced standards (1)
NF EN 836+A4
November 2011
Standard Cancelled
Garden equipment - Powered lawnmowers - Safety

Le présent document, préparé dans le but de donner des moyens de se conformer aux exigences essentielles de la Directive Machines 2006/42/CE, détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des tondeuses à moteur à conducteur à pied ou à conducteur porté qu'elles soient à usage professionnel ou non.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences relatives aux tondeuses à gazon à conducteur porté
    2
  • 4.1 Généralités
    2
  • 4.2 Commandes
    2
  • 4.3 Commande de présence de l'opérateur (OPC)
    6
  • 4.4 Freins
    6
  • 4.5 Protecteurs
    9
  • 4.6 Stabilité
    12
  • 4.7 Structure de protection au retournement (ROPS)
    13
  • 4.8 Ceintures de sécurité
    13
  • 4.9 Sièges et repose-pieds
    14
  • 4.10 Position de transport de l'assemblage d'organes de coupe
    15
  • 4.11 Ventilateur séparé pour collecte de l'herbe
    16
  • 4.12 Surfaces chaudes
    16
  • 4.13 Gaz d'échappement
    16
  • 4.14 Éléments sous pression des circuits hydrauliques
    16
  • 4.15 Écoulement de liquide
    17
  • 4.16 Circuit électrique
    17
  • 4.17 Immunité électromagnétique
    18
  • 4.18 Bruit
    18
  • 4.19 Vibrations
    19
  • 5 Exigences particulières relatives aux tondeuses à gazon à axe vertical à conducteur porté
    19
  • 5.1 Organe de coupe
    19
  • 5.2 Impact sur l'organe de coupe
    20
  • 5.3 Enceinte de l'organe de coupe
    21
  • 5.4 Intégrité structurelle
    25
  • 5.5 Projection d'objets
    25
  • 5.6 Bacs de ramassage .26
  • 6 Exigences particulières relatives aux tondeuses à gazon à lames hélicoïdales à conducteur porté
    26
  • 6.1 Enceinte de l'organe de coupe
    26
  • 6.2 Ligne de projection
    29
  • 6.3 Temps d'arrêt de l'organe de coupe
    29
  • 7 Informations pour l'utilisation
    29
  • 7.1 Notice d'instructions
    29
  • 7.2 Marquages et avertissements
    33
  • Annexe A (normative) Essai de stabilité d'une tondeuse à gazon à conducteur porté
    35
  • Annexe B (normative) Détermination du contact avec les éléments mobiles activés par le moteur
    38
  • Annexe C (informative) Liste des phénomènes dangereux significatifs
    42
  • Bibliographie
    44
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ