NF EN ISO 5667-3

NF EN ISO 5667-3

May 2013
Standard Cancelled mandatory application standard
  • Consult online for free
  • Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here

Water quality - Sampling - Part 3 : preservation and handling of water samples

ISO 5667-3:2012 establishes general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays, and passive sampling as specified in the scope of ISO 5667-23.ISO 5667-3:2012 is particularly appropriate when spot or composite samples cannot be analysed on site and have to be transported to a laboratory for analysis.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2013

Number of pages

64 p.

Reference

NF EN ISO 5667-3

ICS Codes

13.060.45   Examination of water in general

Classification index

T90-511-3

Print number

1 - 24/04/2013

International kinship

ISO 5667-3:2012

European kinship

EN ISO 5667-3:2012
Sumary
Water quality - Sampling - Part 3 : preservation and handling of water samples

ISO 5667-3:2012 establishes general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays, and passive sampling as specified in the scope of ISO 5667-23.

ISO 5667-3:2012 is particularly appropriate when spot or composite samples cannot be analysed on site and have to be transported to a laboratory for analysis.

Replaced standards (1)
NF EN ISO 5667-3
June 2004
Standard Cancelled
Water quality - Sampling - Part 3 : guidance on the preservation and handling of water samples

ISO 5667-3:2003 gives general guidelines on the precautions to be taken to preserve and transport all water samples including those for biological analyses but not those intended for microbiological analysis. These guidelines are particularly appropriate when spot or composite samples cannot be analysed on-site and have to be transported to a laboratory for analysis.

Standard replaced by (1)
NF EN ISO 5667-3
June 2018
Standard Current
Water quality - Sampling - Part 3 : preservation and handling of water samples

This document specifies general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope of ISO 5667‑23. This document is particularly appropriate when spot or composite samples cannot be analysed on site and have to be transported to a laboratory for analysis.

Table of contents
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Échantillonnage et chaîne de surveillance
    2
  • 5 Réactifs et matériel
    2
  • 5.1 Solides
    3
  • 5.2 Solutions
    3
  • 5.3 Matériel
    4
  • 6 Récipients
    5
  • 6.1 Choix et préparation du récipient
    5
  • 6.2 Filtration sur site
    5
  • 6.3 Remplissage du récipient
    5
  • 7 Manipulation et conservation des échantillons
    5
  • 7.1 Manipulation et conservation pour l'examen physique et chimique
    5
  • 7.2 Manipulation et conservation pour l'examen biologique
    6
  • 7.3 Manipulation et conservation pour l'analyse radiochimique
    7
  • 8 Transport des échantillons
    7
  • 9 Identification des échantillons
    8
  • 10 Réception des échantillons
    8
  • 11 Stockage des échantillons
    9
  • Annexe A (informative) Techniques de conservation des échantillons
    10
  • Annexe B (informative) Préparation des récipients
    46
  • Annexe C (informative) Protocole utilisé dans les études de validation hollandaises
    48
  • Bibliographie
    50
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ