NF EN ISO 6803

NF EN ISO 6803

November 2008
Standard Cancelled

Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing

ISO 6803:2008 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.Impulse test procedures with flexing can be found in ISO 6802, Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic impulse test with flexing.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2008

Number of pages

11 p.

Reference

NF EN ISO 6803

ICS Codes

23.040.70   Hoses and hose assemblies

Classification index

T47-286

Print number

1 - 14/11/2008

International kinship

European kinship

EN ISO 6803:2008
Sumary
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing

ISO 6803:2008 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.

Impulse test procedures with flexing can be found in ISO 6802, Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic impulse test with flexing.

Replaced standards (1)
NF EN ISO 6803
December 1998
Standard Cancelled
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.

Standard replaced by (1)
NF EN ISO 6803
April 2017
Standard Current
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing

ISO 6803:2017 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements. NOTE Impulse test procedures with flexing can be found in ISO 6802.

Table of contents
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Appareillage
    1
  • 5 Fluide d'essai
    2
  • 6 Température d'essai
    2
  • 7 Éprouvettes
    2
  • 8 Mode opératoire
    2
  • 9 Expression des résultats
    3
  • 10 Rapport d'essai
    5
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ