NF EN ISO 8503-5

June 2005

Standard Cancelled

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5 : replica tape method for the determination of the surface profile

ISO 8503-5:2003 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2. The method uses replica tape and a suitable gauge for measuring, on site, the roughness of a surface before the application of paint or another protective coating.The method is applicable within the range of profiles cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit measurement of average peak-to-valley profiles of 20 micrometres to 115 micrometres. The method is valid for surfaces that have been cleaned with either metallic or non-metallic abrasives.

View the extract

Main informations

Collections

National standards and national normative documents

Publication date

June 2005

Number of pages

15 p.

Reference

NF EN ISO 8503-5

ICS Codes

17.040.20 Properties of surfaces

25.220.10 Surface preparation

Classification index

T35-503-5

Print number

1 - 12/05/2005

International kinship

ISO 8503-5:2003

European kinship

EN ISO 8503-5:2004

Sumary

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5 : replica tape method for the determination of the surface profile

The method is applicable within the range of profiles cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit measurement of average peak-to-valley profiles of 20 micrometres to 115 micrometres. The method is valid for surfaces that have been cleaned with either metallic or non-metallic abrasives.

Standard replaced by (1)

NF EN ISO 8503-5

May 2017

Standard Current

ISO 8503-5:2017 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2. The method uses replica tape and a suitable gauge for measuring, on site, the roughness of a surface before the application of paint or another protective coating. The method is applicable within the range of profile heights cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit measurement of average peak-to-valley profiles of 20 µm to 115 µm. The method is valid for surfaces that have been cleaned with abrasives.

Table of contents

1
Domaine d'application 1
2
Références normatives 1
3
Termes et définitions 2
4
Principe 2
5
Appareillage 2
6
Entretien et assurance de l'étalonnage pour la méthode de l'empreinte sur ruban adhésif 2
7
Mode opératoire 3
8
Spécification de l'erreur acceptable 3
9
Rapport d'essai 4
Annexe A (informative) Erreurs de mesure associées à la détermination du profil au moyen d'un ruban adhésif à empreinte
5
Annexe B (informative) Indications sur la correspondance entre les déterminations du profil par ruban adhésif à empreinte et par un échantillon de comparaison viso-tactile ISO
6

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ