NF EN ISO 8528-13
Reciprocating internal combustion engine driven alternating current generating sets - Part 13 : safety
ISO 8528-13:2016 specifies the safety requirements for reciprocating internal combustion (RIC) engine driven generating sets up to 1 000 V consisting of an RIC engine, an alternating current (AC) generator including the additional equipment required for operating, e.g. controlgear, switchgear, auxiliary equipment. It is applicable to generating sets for land and marine use (domestic, recreational and industrial application). It is not applicable to generating sets used on board of seagoing vessels and mobile offshore units as well as on aircraft or to propel road vehicles and locomotives. NOTE This part of ISO 8528 does not apply to arc welding equipment (IEC 60974 series). The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this part of ISO 8528. The hazards relevant to RIC engine driven generating sets are identified in Annex A. ISO 8528-13:2016 deals with the special requirements of test and safety design which should be observed in addition to the definitions and requirements in ISO 8528-1, ISO 8528-2, ISO 8528-3, ISO 8528-4, ISO 8528-5 and ISO 8528-6, where applicable. It specifies safety requirements in order to protect the user from danger.
ISO 8528-13:2016 specifies the safety requirements for reciprocating internal combustion (RIC) engine driven generating sets up to 1 000 V consisting of an RIC engine, an alternating current (AC) generator including the additional equipment required for operating, e.g. controlgear, switchgear, auxiliary equipment.
It is applicable to generating sets for land and marine use (domestic, recreational and industrial application). It is not applicable to generating sets used on board of seagoing vessels and mobile offshore units as well as on aircraft or to propel road vehicles and locomotives.
NOTE This part of ISO 8528 does not apply to arc welding equipment (IEC 60974 series).
The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this part of ISO 8528.
The hazards relevant to RIC engine driven generating sets are identified in Annex A.
ISO 8528-13:2016 deals with the special requirements of test and safety design which should be observed in addition to the definitions and requirements in ISO 8528-1, ISO 8528-2, ISO 8528-3, ISO 8528-4, ISO 8528-5 and ISO 8528-6, where applicable. It specifies safety requirements in order to protect the user from danger.
Le présent document détermine les prescriptions de sécurité pour la conception et la construction des groupes électrogènes entraînés par moteurs alternatifs à combustion interne. Il est applicable aux groupes électrogènes utilisés pour des applications terrestres et marines, à l'exclusion des groupes électrogènes utilisés sur les navires de haute mer et les unités mobiles "off shore" ainsi qu'à bord des aéronefs ou pour la propulsion de véhicules terrestres et de locomotives. Le présent document vient à l'appui de la Directive Machines 2006/42/CE.
- Avant-propos
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Généralités
-
5 Phénomènes dangereux
-
6 Prescriptions de sécurité et essais
-
7 Instructions de fonctionnement et de maintenance
-
8 Étiquettes de sécurité
-
9 Marquage
- Annexe A (normative) Liste des phénomènes dangereux
- Annexe B (normative) Application de l'IEC 60204-1:2009 aux groupes électrogènes
- Annexe C (normative) Manuel d'instructions - Guide de sécurité - Prescriptions supplémentaires relatives aux groupes électrogènes de faible puissance destinés à être utilisés par des profanes
- Annexe ZA (informative) Relation entre la présente norme européenne et les exigences essentielles de la Directive UE 2006/42/CE
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ