NF EN ISO 8611-1

NF EN ISO 8611-1

November 2012
Standard Cancelled

Pallets for materials handling - Flat pallets - Part 1 : test methods

ISO 8611-1:2011 specifies the test methods available for evaluating new flat pallets for materials handling.The test methods are split into groups for nominal load testing, maximum working load testing and durability comparison testing.It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2012

Number of pages

42 p.

Reference

NF EN ISO 8611-1

ICS Codes

55.180.20   General purpose pallets

Classification index

H50-003-1

Print number

1 - 18/10/2012

International kinship

ISO 8611-1:2011

European kinship

EN ISO 8611-1:2012
Sumary
Pallets for materials handling - Flat pallets - Part 1 : test methods

ISO 8611-1:2011 specifies the test methods available for evaluating new flat pallets for materials handling.

The test methods are split into groups for nominal load testing, maximum working load testing and durability comparison testing.

It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Replaced standards (1)
NF EN ISO 8611-1
August 2004
Standard Cancelled
Pallets for materials handling - Flat pallets - Part 1 : test methods

ISO 8611-1:2004 specifies test methods of existing and prototype flat pallets for materials handling for all types of use It cannot be used to evaluate a pallet to normative ISO requirements without the additional application of ISO/TS 8611-2 and ISO/TS 8611-3.

Standard replaced by (1)
NF EN ISO 8611-1
January 2022
Standard Current
Pallets for materials handling - Flat pallets - Part 1 : test methods

This document specifies the test methods available for evaluating new flat pallets for materials handling. The test methods are split into groups for: —    nominal load testing; —    maximum working load testing; —    durability comparison testing. This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet. NOTE       Specific tests for determining load capacity do not replace the value of conducting field tests on specific pallet designs.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Mesurages
    3
  • 5 Fidélité et exactitude des essais et de l'appareillage
    4
  • 6 Charge d'essai
    4
  • 7 Liste des essais
    4
  • 8 Essais
    6
  • 8.1 Essai 1 - Essais de flexion
    6
  • 8.2 Essai 2 - Essais de levage au moyen de fourches
    8
  • 8.3 Essai 3 - Essais de compression de dés ou de chevrons
    10
  • 8.4 Essai 4 - Essai de gerbage
    12
  • 8.5 Essai 5 - Essais de flexion du plancher inférieur
    13
  • 8.6 Essai 6 - Essais de flexion pour palettes à ailes
    15
  • 8.7 Essai 7 - Essais de flexion au moyen d'un coussin gonflable
    17
  • 8.8 Essai 8 - Essai de cisaillement statique
    20
  • 8.9 Essai 9 - Essai de chute sur angle
    21
  • 8.10 Essai 10 - Essais de choc avec cisaillement
    23
  • 8.11 Essai 11 - Essai de choc sur l'arête du plancher supérieur
    24
  • 8.12 Essai 12 - Essai de choc sur les dés
    26
  • 8.13 Essai 13 - Essai de détermination du coefficient de frottement statique
    28
  • 8.14 Essai 14- Essai de détermination de l'angle de glissement
    28
  • 9 Rapport d'essai
    30
  • 9.1 Informations générales - Tous matériaux
    30
  • 9.2 Informations relatives aux palettes en bois et en matériau composite à base de bois
    30
  • 9.3 Informations relatives aux palettes en matières plastiques
    31
  • 9.4 Informations relatives aux palettes fabriquées à partir d'autres matériaux
    31
  • Bibliographie
    32
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ