NF EN ISO 8611-2

NF EN ISO 8611-2

November 2012
Standard Cancelled

Pallets for materials handling - Flat pallets - Part 2 : performance requirements and selection of tests

ISO 8611-2:2011 specifies the performance requirements to establish nominal loads for new flat pallets.It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2012

Number of pages

23 p.

Reference

NF EN ISO 8611-2

ICS Codes

55.180.20   General purpose pallets

Classification index

H50-003-2

Print number

1 - 18/10/2012

International kinship

ISO 8611-2:2011

European kinship

EN ISO 8611-2:2012
Sumary
Pallets for materials handling - Flat pallets - Part 2 : performance requirements and selection of tests

ISO 8611-2:2011 specifies the performance requirements to establish nominal loads for new flat pallets.

It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Replaced standards (1)
FD ISO/TS 8611-2
April 2006
Published document Cancelled
Pallets for materials handling - Flat pallets - Part 2 : performance requirements and selection of tests

ISO 8611-2:2005 specifies the performance requirements and the selection of tests for flat pallets of all materials being subjected to the tests defined in ISO 8611-1. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that may be mechanically attached to the pallet and which contributes to the strength of the pallet.

Standard replaced by (1)
NF EN ISO 8611-2
January 2022
Standard Current
Pallets for materials handling - Flat pallets - Part 2 : performance requirements and selection of tests

This document specifies the performance requirements to establish nominal loads for new flat pallets. It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Conditions d'essai
    3
  • 4.1 Généralités
    3
  • 4.2 Palettes en bois
    3
  • 4.3 Palettes métalliques
    4
  • 4.4 Palettes en plastique
    4
  • 4.5 Palettes en carton
    4
  • 4.6 Palettes en matériaux composites à base de bois
    4
  • 5 Nombre de répétitions
    4
  • 6 Exigences de performance
    5
  • 7 Sélection des essais
    8
  • 7.1 Utilisation prévue
    8
  • 7.2 Manutention de marchandises avec stockage sur rayonnages et gerbage
    8
  • 7.3 Manutention de marchandises avec gerbage et sans stockage sur rayonnages
    9
  • 7.4 Manutention de marchandises sans stockage sur rayonnages ni gerbage
    9
  • 7.5 Applications spéciales
    9
  • 8 Charge d'essai - charge nominale
    9
  • 8.1 Essais de résistance
    9
  • 8.2 Charge limite, U
    9
  • 8.3 Tests de rigidité
    10
  • 8.4 Charge nominale
    10
  • 9 Durée des essais de rigidité statique
    10
  • 10 Nombre de chocs pour les essais dynamiques
    11
  • 11 Rapport d'essai
    11
  • Annexe A (informative) Graphiques représentant une force type en fonction de la déformation lors des essais des palettes montrant la déformation à la charge limite, U
    12
  • Bibliographie
    13
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ