NF EN ISO 9445

NF EN ISO 9445

May 2006
Standard Cancelled

Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lenghts - Tolerances on dimensions and form

ISO 9445 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip. This International Standard also specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,3 mm to 8,0 mm manufactured from wide strip by longitudinal slitting and to cut lengths manufactured from such strip.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2006

Number of pages

20 p.

Reference

NF EN ISO 9445

ICS Codes

77.140.20   Stainless steels
77.140.50   Flat steel products and semi-products

Classification index

A35-540

Print number

1 - 27/04/2006

International kinship

ISO 9445:2002

European kinship

EN ISO 9445:2006
Sumary
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lenghts - Tolerances on dimensions and form

ISO 9445 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.

This International Standard also specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,3 mm to 8,0 mm manufactured from wide strip by longitudinal slitting and to cut lengths manufactured from such strip.

Replaced standards (2)
NF EN 10258
July 1997
Standard Cancelled
Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape.

Le présent document définit les tolérances sur les dimensions et la forme, le mesurage, les conditions de livraison des feuillards ou feuillards coupés à longueur laminés à froid en acier inoxydable et en acier réfractaire présentant les caractéristiques ci-après : épaisseur < 3,0 mm, largeur de laminage < 600 mm.

NF EN 10259
July 1997
Standard Cancelled
Cold-rolled stainless steel wide strip and plate/sheet. Tolerances on dimensions and shape.

Le présent document définit les tolérances sur les dimensions et la forme des larges bandes et tôles laminées à froid en acier inoxydable et en acier réfractaire présentant les caractéristiques ci-après : épaisseur < ou = 6,5 mm, largeur de laminage comprise entre 600 mm et 2 100 mm.

Standard replaced by (2)
NF EN ISO 9445-1
June 2010
Standard Current
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1 : narrow strip and cut lengths

<p>ISO 9445-1:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.</p> <p>Narrow strip and cut lengths with widths of less than 600 mm, which are manufactured from wide strip by longitudinal slitting, are covered in ISO 9445-2.</p>

NF EN ISO 9445-2
June 2010
Standard Current
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2 : wide strip and plate/sheet

<p>ISO 9445-2:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,30 mm to 8,0 mm and in rolling widths from 600 mm to 2 100 mm. It also applies to slit cold-rolled wide strip in widths less than 600 mm manufactured from wide strip by longitudinal slitting and to cut lengths manufactured from such strip.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Référence normative
    1
  • 3 Termes et définitions
    1
  • 4 Informations à fournir par l'acheteur
    1
  • 5 Type de livraison et état de livraison
    2
  • 6 Épaisseurs préférentielles
    3
  • 7 Tolérances sur l'épaisseur
    3
  • 8 Tolérances sur la largeur
    7
  • 9 Diamètres intérieurs préférentiels des bobines pour les produits laminés à froid
    8
  • 10 Tolérances sur la longueur
    8
  • 11 Tolérances sur la rectitude des rives
    9
  • 12 Tolérances sur l'équerrage
    10
  • 13 Tolérances sur la planéité
    11
  • 14 Tolérances sur l'ondulation des rives pour les bandes laminées à froid
    11
  • 15 Formes des bobines
    12
  • 16 Format commandé pour les tôles et les feuillards coupés à longueur
    12
  • 18 Mesure de la largeur
    12
  • 19 Mesure de la longueur
    12
  • 20 Mesure de la rectitude des rives
    13
  • 21 Mesure de l'équerrage
    13
  • 22 Mesure de la planéité et de l'ondulation
    14
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ