NF EN ISO 9773

NF EN ISO 9773

September 2024
Standard Current

Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

This document specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically oriented thin and relatively flexible plastics specimens exposed to a low-energy-level flame ignition source.NOTE  These specimens cannot be tested using method B of IEC 60695-11-10:2013 since they distort or shrink away from the applied flame source without igniting.This test method determines the afterflame and afterglow times of specimens.The classification system described in Annex A is intended for quality control and the preselection of component materials for products. The classification established by this method of test is applicable only to the material used for the specimens.NOTE  Test results are influenced by material components, e.g. pigments, fillers, concentrations of fire retardants.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2024

Number of pages

20 p.

Reference

NF EN ISO 9773

ICS Codes

13.220.40   Ignitability and burning behaviour of materials and products
83.080.01   Plastics in general

Classification index

T51-076

Print number

1

International kinship

European kinship

EN ISO 9773:2024
Sumary
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

This document specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically oriented thin and relatively flexible plastics specimens exposed to a low-energy-level flame ignition source.

NOTE  These specimens cannot be tested using method B of IEC 60695-11-10:2013 since they distort or shrink away from the applied flame source without igniting.

This test method determines the afterflame and afterglow times of specimens.

The classification system described in Annex A is intended for quality control and the preselection of component materials for products. The classification established by this method of test is applicable only to the material used for the specimens.

NOTE  Test results are influenced by material components, e.g. pigments, fillers, concentrations of fire retardants.

Replaced standards (2)
NF EN ISO 9773
May 1998
Standard Cancelled
Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.

Le présent document prescrit une méthode pour la sélection en laboratoire permettant de comparer les comportements au feu respectifs d'éprouvettes en matière plastique mince, relativement souple, orientées verticalement et exposées à une source d'allumage de faible énergie.

Standard Cancelled
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1 : specimens

Le présent document actualise les références normatives et remplace l'article 7 "Éprouvettes" de la norme NF EN ISO 9773:1998.

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Signification de l'essai
  • 6 Appareillage et matériaux
  • 7 Éprouvettes
  • 8 Conditionnement
  • 9 Modes opératoires d'essai
  • 10 Expression des résultats
  • 11 Fidélité
  • 12 Rapport d'essai
  • A Système de classement pour la détermination de la combustibilité d'éprouvettes verticales souples soumises à une flamme de 20 mm de hauteur
  • Bibliographie
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ