NF ISO 10791-6

NF ISO 10791-6

February 2015
Standard Current

Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations

ISO 10791-6:2014 specifies, with reference to ISO 230?1 and ISO 230?4, certain kinematic tests for machining centres, concerning spindle speeds, feed and the accuracy of the paths described by the simultaneous movement of two or more numerically controlled (NC) linear and/or rotary axes.It applies to machining centres having three linear axes (X, Y, and Z) and additionally one or two rotary axes (A, B, or C). Movements other than those mentioned are considered as special features and the relevant tests are not included in this part of ISO 10791.It deals only with the verification of kinematic accuracy of the machine and does not apply to the testing of the machine operation, e.g. vibrations, abnormal noises, etc., which should generally be checked separately.The tests described in ISO 10791-6:2014 are also applicable, totally or partially, subject to specific agreement between the manufacturer/supplier and the user, to numerically controlled milling and boring machines, when their configuration, components, and movements are compatible with the tests described therein.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2015

Number of pages

56 p.

Reference

NF ISO 10791-6

ICS Codes

25.040.10   Machining centres

Classification index

E60-172-6

Print number

1

International kinship

ISO 10791-6:2014
Sumary
Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations

ISO 10791-6:2014 specifies, with reference to ISO 230?1 and ISO 230?4, certain kinematic tests for machining centres, concerning spindle speeds, feed and the accuracy of the paths described by the simultaneous movement of two or more numerically controlled (NC) linear and/or rotary axes.

It applies to machining centres having three linear axes (X, Y, and Z) and additionally one or two rotary axes (A, B, or C). Movements other than those mentioned are considered as special features and the relevant tests are not included in this part of ISO 10791.

It deals only with the verification of kinematic accuracy of the machine and does not apply to the testing of the machine operation, e.g. vibrations, abnormal noises, etc., which should generally be checked separately.

The tests described in ISO 10791-6:2014 are also applicable, totally or partially, subject to specific agreement between the manufacturer/supplier and the user, to numerically controlled milling and boring machines, when their configuration, components, and movements are compatible with the tests described therein.

Replaced standards (1)
NF ISO 10791-6
September 1998
Standard Cancelled
Test conditions for machining centres - Part 6 : accuracy of feeds, speeds and interpolations

Le présent document, qui fait partie d'un ensemble de 12 documents traitant des conditions de réception des centres d'usinage, définit la précision des avances, des vitesses et des mouvements réalisés par interpolation d'axes numérisés de ces machines.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Observations préliminaires
    2
  • 5 Essais cinématiques
    3
  • Annexe A (normative) Essais cinématiques pour des machines à deux axes rotatifs dans la tête porte-broche
    10
  • Annexe B (normative) Essais cinématiques pour des machines à deux axes rotatifs du côté pièce
    22
  • Annexe C (normative) Essais cinématiques pour des machines à tête pivotante et/ou à table rotative
    33
  • Annexe D (informative) Précautions à prendre pour le montage d'essai des Annexes A à C
    43
  • Bibliographie
    49
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ