NF ISO 11783-10

NF ISO 11783-10

April 2010
Standard Cancelled

Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10 : task controller and management information system data interchange

ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-10:2009 describes the task-controller applications layer, which defines the requirements and services needed for communicating between the task controller and electronic control units. The data format to communicate with the farm-management computer, the calculations required for control and the message format sent to the control function are defined in ISO 11783-10:2009.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2010

Number of pages

112 p.

Reference

NF ISO 11783-10

ICS Codes

35.240.68   IT applications in agriculture
65.060.01   Agricultural machines and equipment in general

Classification index

U05-100-10

Print number

1 - 25/03/2010

International kinship

ISO 11783-10:2009
Sumary
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10 : task controller and management information system data interchange

ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-10:2009 describes the task-controller applications layer, which defines the requirements and services needed for communicating between the task controller and electronic control units. The data format to communicate with the farm-management computer, the calculations required for control and the message format sent to the control function are defined in ISO 11783-10:2009.

Standard replaced by (1)
NF ISO 11783-10
November 2015
Standard Current
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10 : task controller and management information system data interchange

ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed, or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information storage and display units, whether mounted on, or part of, the tractor or implement. ISO 11783-10:2015 describes the task controller applications layer, which defines the requirements and services needed for communicating between the task controller (TC) and electronic control units. The data format to communicate with the farm-management computer, the calculations required for control, and the message format sent to the control function are defined in ISO 11783-10:2015.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Termes abrégés
    2
  • 5 Description générale
    2
  • 5.1 Gestion des tâches
    2
  • 5.2 Gestion des tâches sur l'ordinateur FMIS
    4
  • 5.3 Présélection et affectation des ensembles de travail
    4
  • 5.4 Pilote d'interface du contrôleur de tâches
    4
  • 5.5 Interface utilisateur du contrôleur de tâches
    5
  • 6 Exigences relatives au contrôleur de tâches
    5
  • 6.1 Sélection et exécution des tâches
    5
  • 6.2 Enregistrement du temps et de la position
    6
  • 6.3 Paramètres d'enregistrement des numéros de groupes de paramètres
    6
  • 6.4 Gestion de la connexion
    7
  • 6.5 Gestion de la connexion
    9
  • 6.6 Échange de données sur le réseau
    9
  • 7 Transfert de données
    16
  • 7.1 Généralités
    16
  • 7.2 Langage de balisage extensible
    16
  • 7.3 Définition de schéma extensible
    17
  • 7.4 Définition du schéma XML
    18
  • 7.5 Fichiers de transfert de données XML
    20
  • 7.6 Fichiers de transfert de données binaires
    22
  • 7.7 Donnés de description des dispositifs
    27
  • Annexe A (normative) Objets de description du dispositif
    31
  • Annexe B (normative) Définitions des messages
    38
  • Annexe C (normative) Diagramme de relations des éléments XML
    51
  • Annexe D (normative) Éléments et attributs XML
    53
  • Bibliographie
    106
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ