NF ISO 13041-2
Test conditions for numerically controlled turning machines and turning centres - Part 2 : geometric tests for machines with a vertical workholding spindle
ISO 13041-2:2008 specifies, with reference to ISO 230-1 and ISO 230-7, the geometric tests on general purpose numerically controlled (NC) turning machines and tuning centres with vertical workholding spindles, as well as the corresponding applicable tolerances. ISO 13041-2:2008 explains different concepts or configurations and common features of NC turning machines and turning centres with vertical workholding spindles. It also provides a terminology and designation of controlled axes.
ISO 13041-2:2008 specifies, with reference to ISO 230-1 and ISO 230-7, the geometric tests on general purpose numerically controlled (NC) turning machines and tuning centres with vertical workholding spindles, as well as the corresponding applicable tolerances.
ISO 13041-2:2008 explains different concepts or configurations and common features of NC turning machines and turning centres with vertical workholding spindles. It also provides a terminology and designation of controlled axes.
<p>This document specifies, with reference to ISO 230‑1 and ISO 230‑7, the geometric tests for general-purpose normal accuracy numerically controlled (NC) turning machines and turning centres with vertical workholding spindles, as well as the corresponding applicable tolerances.</p> <p>This document explains different concepts or configurations and common features of NC turning machines and turning centres with vertical workholding spindles. It also provides a terminology and designation of controlled axes (see Figures 1, 2 and Table 1).</p> <p>This document deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick slip motion of components) nor to machine characteristics (e.g. speeds, feeds). Tests not concerning the geometric accuracy of the machine are dealt with in other parts of ISO 13041.</p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Observations préliminaires3
-
4.1 Unités de mesure3
-
4.2 Référence à l'ISO 230-1 et à l'ISO 230-73
-
4.3 Nivellement de la machine3
-
4.4 Ordre des essais3
-
4.5 Essais à réaliser3
-
4.6 Instruments de mesure3
-
4.7 Schémas3
-
4.8 Compensation par logiciels4
-
4.9 Tolérance minimale4
-
4.10 Classifications de la machine4
-
4.11 Mouvements linéaires4
-
4.12 Tourelles - Éléments des porte-outils4
-
4.13 Catégories de tailles de la machine4
-
4.14 Configurations des machines5
-
5 Essais géométriques9
-
5.1 Broche porte-outils9
-
5.2 Relation entre la ou les broches porte-outils et les axes de mouvement linéaire12
-
5.3 Écarts angulaires relatifs au mouvement des axes linéaires18
-
5.4 Écart de la rectitude du mouvement des axes linéaires22
-
5.5 Tourelle, broche et porte-outils25
-
6 Essais pour le contrôle de l'exactitude des axes de rotation30
-
6.1 Exactitude de rotation de la broche porte-pièce30
-
6.2 Exactitude en rotation du porte-outils32
- Annexe A (informative) Méthode de mesure des trois points35
- Bibliographie37
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ