NF ISO 14230-3
Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 3 : application layer
This part of ISO 14230 specifies the requirements for the Keyword Protocol 2000 data link on which one or several on-vehicle Electronic Control Units are connected to an off-board tester in order to perform diagnostic functions.This part of ISO 14230 specifies the requirements of the implementation of the Diagnostic Services specified in ISO 14229, including - byte-encoding and hexadecimal values for the service identifiers;- byte-encoding for the parameters of the diagnostic service requests and responses;- hexadecimal values for the standard parameters. The vehicle environment to which this part of ISO 14230 applies may consist of a single tester that may be temporarily connected to the on-vehicle diagnostic data link and several on-vehicle Electronic Control Units connected directly or indirectly.
This part of ISO 14230 specifies the requirements for the Keyword Protocol 2000 data link on which one or several on-vehicle Electronic Control Units are connected to an off-board tester in order to perform diagnostic functions.
This part of ISO 14230 specifies the requirements of the implementation of the Diagnostic Services specified in ISO 14229, including
- byte-encoding and hexadecimal values for the service identifiers;
- byte-encoding for the parameters of the diagnostic service requests and responses;
- hexadecimal values for the standard parameters.
The vehicle environment to which this part of ISO 14230 applies may consist of a single tester that may be temporarily connected to the on-vehicle diagnostic data link and several on-vehicle Electronic Control Units connected directly or indirectly.
Le présent document décrit la mise en oeuvre des services de diagnostic du protocole de communication "Keyword 2000". Ce protocole permet la transmission d'informations de diagnostic entre l'Unité de Contrôle Électronique (UCE) embarquée et un outil de diagnostic non embarqué, et ce, quelle que soit l'architecture de connexion des UCE avec cet outil de diagnostic. Les messages de diagnostic transmis sont déterminés en respectant la définition des services de diagnostic (selon la norme XP ISO/DIS 14229) et les exigences communes aux services de diagnostic (selon la norme XP ISO/DIS 14230-2).
-
1 Domaine d'application1
-
2 Références normatives2
-
3 Définitions2
-
4 Conventions2
-
4.1 Généralités2
-
4.2 Convention de description des services4
-
4.3 Tableau d'unité fonctionnelle6
-
4.4 Récapitulatif des valeurs de l'identificateur de service7
-
4.5 Récapitulatif des valeurs du code de réponse7
-
4.6 Traitement du code de réponse7
-
5 Règles générales de mise en oeuvre10
-
5.1 Définitions des paramètres10
-
5.2 Demandes de services à adressage fonctionnel ou physique11
-
5.3 Exemples de flux de messages de service à adressage physique ou fonctionnel11
-
6 Unité fonctionnelle de gestion de diagnostic19
-
6.1 Service StarffliagnosticSession19
-
6.2 Service StopDiagnosticSession21
-
6.3 Service SecurityAccess22
-
6.4 Service TesterPresent25
-
6.5 Service ECUReset27
-
6.6 Service ReadECUIdentification29
-
7 Unité fonctionnelle de transmission de données30
-
7.1 Service ReadData ByLocal Identifier30
-
7.2 Service ReadData ByCommonIdentifier33
-
7.3 Service ReadMemoryByAddress35
-
7.4 Service DynamicallyDefineLocalldentifier36
-
7.5 Service WriteDataByLocalldentifier42
-
7.6 Service WriteDataByCommonldentifier44
-
7.7 Service WriteMemoryByAddress45
-
7.8 Service SetDataRates46
-
8 Unité fonctionnelle de transmission de données enregistrées47
-
8.1 Service ReadDiagnosticTroubleCodes48
-
8.2 Service ReadDiagnosticTroubleCodesByStatus50
-
8.3 Service ReadStatusOfDiagnosticTroubleCodes52
-
8.4 Service ReadFreezeFrameData53
-
8.5 Service ClearDiagnosticInformation58
-
9 Unité fonctionnelle de contrôle d'entrée/sortie60
-
9.1 Service InputOutputControlByLocalldentifier60
-
9.2 Service InputOutputControlByCommonIdentifier61
-
10 Unité fonctionnelle de télécommande de routines63
-
10.1 Service StartRoutineByLocalIdentifier63
-
10.2 Service StartRoutineByAddress64
-
10.3 Service StopRoutineByLocalldentifier66
-
10.4 Service StopRoutineByAddress68
-
10.5 Service RequestRoutineResultsByLocalldentifier69
-
10.6 Service RequestRoutineResultsByAddress71
-
11 Unité fonctionnelle de téléchargement vers l'amont ou l'aval72
-
11.1 Service RequestDownIoad72
-
11.2 Service RequestUpload74
-
11.3 Service TransferData76
-
11.4 Service RequestTransferExit78
-
12 Extension de service du protocole "Keyword 2000"80
-
12.1 Service EscapeCode80
-
13 Exemples d'application81
-
13.1 Description des UCE embarquées81
-
13.2 Initialisation fonctionnelle et communication à adressage fonctionnel82
-
13.3 Messages de réponse uniques et multiples et achèvement de la communication83
-
13.4 Paramètre SecurityAccess, transfert des données et modification des paramètres de temps84
-
13.5 Service ReadDataByLocalIdentifier avec DynamicallyDefineLocalldentifier87
- Annexe A (informative) Bibliographie92
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ