NF ISO 14740
Forest machinery. Backpack power units for brush-cutters, grass-trimmers, pole-cutters and similar appliances. Safety requirements and testing.
Le présent document détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des sources motrices portées à dos comprenant un moteur à combustion interne comme source de puissance et utilisées pour alimenter une variété d'appareils.
Le présent document détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des sources motrices portées à dos comprenant un moteur à combustion interne comme source de puissance et utilisées pour alimenter une variété d'appareils.
ISO 11806-2:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a back-pack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. ISO 11806-2:2011 is not applicable to lawn-edge trimmers or to brush-cutters equipped with metallic blades consisting of more than one part, e.g. pivoting chain. ISO 11806-2:2011, taken together with the relevant clauses of ISO 11806-1, deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the back-pack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
ISO 11680-2:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a back-pack power unit and using a drive shaft to transmit power to a cutting attachment consisting of a saw chain or reciprocating or circular saw blade. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. ISO 11680-2:2011, together with the relevant sections of ISO 11680-1, deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instruction handbook) and whole-body vibration from the back-pack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Définitions2
-
4 Exigences de sécurité2
-
4.1 Système d'échappement3
-
4.2 Commandes3
-
4.3 Zone de préhension3
-
4.4 Support du moteur3
-
4.5 Harnais3
-
4.6 Composants animés4
-
4.7 Tuyaux hydrauliques et pneumatiques4
-
4.8 Protection contre le contact avec les parties chaudes4
-
4.9 Protection contre le contact avec les parties sous haute tension4
-
4.10 Ouverture du réservoir de carburant5
-
4.11 Dispositif de démarrage5
-
4.12 Embrayage5
-
5 Vérification des exigences de sécurité5
-
6 Marquages6
-
7 Notice d'instructions6
- Annexe A (normative) Liste des phénomènes dangereux9
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ