NF ISO 16000-6

NF ISO 16000-6

June 2005
Standard Cancelled

Indoor air - Part 6 : determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TAr sorbent, thermal desorption and gas chromatography using MS/FID

ISO 16000-6:2004 specifies a method for determination of volatile organic compounds (VOCs) in indoor air and in air sampled for the determination of the emission of VOCs from building materials using test chambers and cells. The method is based on use of Tenax TA® sorbent with subsequent thermal desorption and gas chromatographic analysis. The method is applicable to the measurement of non-polar and slightly polar VOCs in a concentration range of sub-microgram per cubic metre to up to several milligrams per cubic metre. Using the principles described in this method, some very volatile compounds and semivolatile organic compounds can also be analysed.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2005

Number of pages

33 p.

Reference

NF ISO 16000-6

ICS Codes

13.040.20   Ambient atmospheres

Classification index

X43-404-6

Print number

1 - 06/06/2005

International kinship

ISO 16000-6:2004
Sumary
Indoor air - Part 6 : determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TAr sorbent, thermal desorption and gas chromatography using MS/FID

ISO 16000-6:2004 specifies a method for determination of volatile organic compounds (VOCs) in indoor air and in air sampled for the determination of the emission of VOCs from building materials using test chambers and cells. The method is based on use of Tenax TA® sorbent with subsequent thermal desorption and gas chromatographic analysis.

The method is applicable to the measurement of non-polar and slightly polar VOCs in a concentration range of sub-microgram per cubic metre to up to several milligrams per cubic metre. Using the principles described in this method, some very volatile compounds and semivolatile organic compounds can also be analysed.

Standard replaced by (1)
NF ISO 16000-6
March 2012
Standard Cancelled
Indoor air - Part 6 : determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA(R) sorbent, thermal desorption and gas chromatography using MS or MS/FID

ISO 16000-6:2011 specifies a method for determination of volatile organic compounds (VOCs) in indoor air and in air sampled for the determination of the emission of VOCs from building products or materials and other products used in indoor environments using test chambers and test cells. The method uses Tenax TAÒ sorbent with subsequent thermal desorption and gas chromatographic analysis employing a capillary column or columns and a flame ionization detector and/or a mass spectrometric detector. The method is applicable to the measurement of non-polar and slightly polar VOCs at concentrations ranging from sub-micrograms per cubic metre to several milligrams per cubic metre. Using the principles specified in this method, an annex describes how some very volatile compounds and semi-volatile organic compounds can also be analysed.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Principe
    2
  • 5 Réactifs et produits
    3
  • 6 Appareillage
    4
  • 7 Conditionnement et stockage des tubes à adsorption
    6
  • 7.1 Conditionnement
    6
  • 7.2 Stockage de tubes à adsorption conditionnés avant échantillonnage
    6
  • 8 Étalonnage de la pompe
    6
  • 9 Échantillonnage
    6
  • 9.1 Échantillonnage d'air intérieur
    6
  • 9.2 Échantillonnage d'air en enceinte d'essai
    7
  • 9.3 Volumes d'échantillonnage
    7
  • 9.4 Conservation d'échantillons chargés
    7
  • 9.5 Échantillons blancs
    7
  • 10 Analyse
    8
  • 10.1 Généralités
    8
  • 10.2 Désorption thermique
    8
  • 10.3 Programme de températures
    9
  • 10.4 Analyse des échantillons
    9
  • 11 Identification de COV individuels
    9
  • 12 Concentration d'analytes dans l'air échantillonné
    9
  • 12.1 Généralités
    9
  • 12.2 Composés organiques volatils (COV)
    9
  • 12.3 Composés organiques volatils totaux (COVT)
    10
  • 12.4 Composés de COTV et de COSV observés en dehors de la gamme de COVT
    11
  • 13 Caractéristiques de performance
    11
  • 14 Rapport d'essai
    12
  • 15 Maîtrise de la qualité
    13
  • Annexe A (informative) Exemples de composés détectés dans l'air intérieur et émanant des produits de construction dans les enceintes d'essai
    14
  • Annexe B (informative) Volumes limites de prélèvement (VLP) pour les vapeurs organiques sélectionnées échantillonnées sur l'adsorbant Tenax TA.
    20
  • Annexe C (informative) Récupération de stockage des solvants sur des tubes à adsorption de Tenax TA
    22
  • Bibliographie
    24
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ