NF ISO 188
NF ISO 188

NF ISO 188

December 2007
Standard Cancelled

Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

ISO 188:2007 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given:Method A: air-oven method using a cell-type oven or cabinet oven with low air speed and a ventilation of 3 to 10 changes per hour;Method B: air-oven method using a cabinet oven with forced air circulation by means of a fan and a ventilation of 3 to 10 changes per hour.

Main informations

Collections

National standards and national normative documents

Publication date

December 2007

Number of pages

23 p.

Reference

NF ISO 188

ICS Codes

83.060   Rubber

Classification index

T46-004

Print number

1 - novembre 2007

International kinship

ISO 188:2007
Sumary
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

ISO 188:2007 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given:

Method A: air-oven method using a cell-type oven or cabinet oven with low air speed and a ventilation of 3 to 10 changes per hour;

Method B: air-oven method using a cabinet oven with forced air circulation by means of a fan and a ventilation of 3 to 10 changes per hour.

Replaced standards (1)
NF T46-004
NF T46-004
December 1985
Standard Cancelled
Vulcanized or thermoplastic rubber. Accelerated ageing or heat resistance determination forced air oven test.

La présente norme décritdes méthodes devieillissement accéléré ou d'exposition à la chaleur destinées à évaluer par élévation de la température, la résistance relative des caoutchoucs à la détérioration dans le temps.

Standard replaced by (1)
NF ISO 188
NF ISO 188
December 2011
Standard Cancelled
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Principe
    1
  • 4 Appareillage
    2
  • 5 Éprouvettes
    5
  • 6 Délai entre la vulcanisation et les essais
    5
  • 7 Conditions de vieillissement (durée et température)
    5
  • 8 Mode opératoire
    6
  • 9 Expression des résultats
    6
  • 10 Fidélité
    7
  • 11 Rapport d'essai
    7
  • Annexe A (informative) Détermination de la vitesse de l'air dans des étuves avec circulation d'air forcée
    8
  • Annexe B (informative) Fidélité
    10
  • Annexe C (informative) Lignes directrices relatives à l'exploitation des résultats de fidélité
    17
ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:

  • mandatory clauses to satisfy,
  • non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document "ISO/IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents" as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!


New: UPSELL service
Need to identify, monitor and decipher standards?