NF ISO 22915-1

NF ISO 22915-1

June 2024
Standard Current

Industrial trucks - Verification of stability - Part 1 : general

The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability.This document specifies basic test criteria and requirements for verifying the stability of industrial trucks, hereafter referred to as "trucks".It is applicable to the following truck types and special conditions:a)       counterbalanced trucks with mast as specified in ISO 22915-2;b)       reach and straddle trucks as specified in ISO 22915-3;c)        pallet stackers, double stackers, and order-picking trucks with operator position elevating up to and including 1 200 mm lift height as specified in ISO 22915-4;d)       single-side-loading trucks as specified in ISO 22915-5;e)       bidirectional and multidirectional trucks as specified in ISO 22915-7;f)         additional stability test for trucks operating in special conditions of stacking with the mast tilted forward as specified in ISO 22915-8;g)       counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-9;h)       additional stability test for trucks operating in special conditions with the load substantially laterally displaced by powered devices as specified in ISO 22915-10;i)         industrial variable-reach trucks as specified in ISO 22915-11;j)         industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-12;k)       rough-terrain trucks with mast as specified in ISO 22915-13;l)         rough-terrain variable-reach trucks as specified in ISO 22915-14;m)     counterbalanced trucks with articulated steering as specified in ISO 22915-15;n)       pedestrian-propelled trucks as specified in ISO 22915-16;o)       towing tractors, burden and personnel carriers as specified in ISO 22915-17;p)       additional stability test for trucks operating in the special condition of offset load, offset determined by utilization as specified in ISO 22915-20;q)       order-picking trucks with operator position elevating above 1 200 mm as specified in ISO 22915-21;r)        lateral- and front-stacking trucks with and without elevating operator position as specified in ISO 22915-22;s)        slewing variable-reach rough-terrain trucks as specified in ISO 22915-24.It is also applicable to trucks operating under the same conditions when equipped with load-handling attachments and low-lift trucks with lift height up to and including 500 mm.This document does not apply to the following:—     trucks handling suspended loads which can swing freely.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2024

Number of pages

16 p.

Reference

NF ISO 22915-1

ICS Codes

53.060   Industrial trucks

Classification index

H96-316-1

Print number

1

International kinship

Sumary
Industrial trucks - Verification of stability - Part 1 : general

The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability.

This document specifies basic test criteria and requirements for verifying the stability of industrial trucks, hereafter referred to as "trucks".

It is applicable to the following truck types and special conditions:

a)       counterbalanced trucks with mast as specified in ISO 22915-2;

b)       reach and straddle trucks as specified in ISO 22915-3;

c)        pallet stackers, double stackers, and order-picking trucks with operator position elevating up to and including 1 200 mm lift height as specified in ISO 22915-4;

d)       single-side-loading trucks as specified in ISO 22915-5;

e)       bidirectional and multidirectional trucks as specified in ISO 22915-7;

f)         additional stability test for trucks operating in special conditions of stacking with the mast tilted forward as specified in ISO 22915-8;

g)       counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-9;

h)       additional stability test for trucks operating in special conditions with the load substantially laterally displaced by powered devices as specified in ISO 22915-10;

i)         industrial variable-reach trucks as specified in ISO 22915-11;

j)         industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-12;

k)       rough-terrain trucks with mast as specified in ISO 22915-13;

l)         rough-terrain variable-reach trucks as specified in ISO 22915-14;

m)     counterbalanced trucks with articulated steering as specified in ISO 22915-15;

n)       pedestrian-propelled trucks as specified in ISO 22915-16;

o)       towing tractors, burden and personnel carriers as specified in ISO 22915-17;

p)       additional stability test for trucks operating in the special condition of offset load, offset determined by utilization as specified in ISO 22915-20;

q)       order-picking trucks with operator position elevating above 1 200 mm as specified in ISO 22915-21;

r)        lateral- and front-stacking trucks with and without elevating operator position as specified in ISO 22915-22;

s)        slewing variable-reach rough-terrain trucks as specified in ISO 22915-24.

It is also applicable to trucks operating under the same conditions when equipped with load-handling attachments and low-lift trucks with lift height up to and including 500 mm.

This document does not apply to the following:

     trucks handling suspended loads which can swing freely.

Replaced standards (1)
NF ISO 22915-1
April 2016
Standard Cancelled
Industrial trucks - Verification of stability - Part 1 : general

ISO 22915-1:2016 series deals with the safety of industrial trucks, as defined in ISO 5053‑1, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled, or pedestrian-propelled vehicles excepting those running on rails. They are either operator-controlled or driverless, and are designed to carry, tow, push, lift, stack or tier in racks. ISO 22915-1:2016 specifies basic test criteria and requirements for verifying the stability of industrial trucks, hereafter referred to as trucks. It applies to the following truck types and special conditions: a) counterbalanced trucks with mast as specified in ISO 22915‑2; b) reach and straddle trucks as specified in ISO 22915‑3; c) pallet stackers, double stackers, and order-picking trucks with operator position elevating up to and including 1 200 mm lift height as specified in ISO 22915‑4; d) single-side-loading trucks as specified in ISO 22915‑5; e) bidirectional and multidirectional trucks as specified in ISO 22915‑7; f) additional stability test for trucks operating in special conditions of stacking with the mast tilted forward as specified in ISO 22915‑8; g) counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915‑9; h) additional stability test for trucks operating in special conditions with the load substantially laterally displaced by powered devices as specified in ISO 22915‑10; i) industrial variable-reach trucks as specified in ISO 22915‑11; j) industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915‑12; k) rough-terrain variable-reach trucks as specified in ISO 22915‑14; l) counterbalanced trucks with articulated steering as specified in ISO 22915‑15; m) pedestrian-propelled trucks as specified in ISO 22915‑16; n) additional stability test for trucks operating in the special condition of offset load, offset determined by utilization as specified in ISO 22915‑20; o) order-picking trucks with operator position elevating above 1 200 mm as specified in ISO 22915‑21. It also applies to trucks operating under the same conditions when equipped with load-handling attachments. ISO 22915-1:2016 does not apply to the following: - trucks handling suspended loads which may swing freely; - low-lift trucks with lift height up to and including 500 mm.

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Essais de stabilité pour les chariots
  • 5 Documents
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ