NF ISO 2878

NF ISO 2878

September 2017
Standard Current

Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance

ISO 2878:2017 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 × 108 Ω and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material. NOTE Highly conductive mixes cannot be made in this way. ISO 2878:2017 specifies the electrode configuration for basic geometries, but it is intended that reference be made to relevant product specifications for requirements for specific products. It does not apply to: a) products the relevant surfaces of which are composed of mixtures of insulating and conductive areas; b) products with a substantial surface area of insulating material, except for footwear (which does not normally have a conductive or antistatic upper).

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2017

Number of pages

15 p.

Reference

NF ISO 2878

ICS Codes

83.060   Rubber

Classification index

T47-132

Print number

1

International kinship

Sumary
Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance

ISO 2878:2017 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 × 108 Ω and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material.

NOTE Highly conductive mixes cannot be made in this way.

ISO 2878:2017 specifies the electrode configuration for basic geometries, but it is intended that reference be made to relevant product specifications for requirements for specific products.

It does not apply to:

a) products the relevant surfaces of which are composed of mixtures of insulating and conductive areas;

b) products with a substantial surface area of insulating material, except for footwear (which does not normally have a conductive or antistatic upper).

Replaced standards (1)
NF ISO 2878
November 2011
Standard Cancelled
Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance

<p>ISO 2878:2011 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 x 10<sup>8</sup> ohms and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material.</p> <p>It specifies the electrode configuration for basic geometries, but reference should be made to relevant product specifications for requirements for specific products.</p> <p>It does not apply to:</p> <ol> <li>products the relevant surfaces of which are composed of mixtures of insulating and conductive areas;</li> <li>products with a substantial surface area of insulating material, except for footwear (which does not normally have a conductive or antistatic upper).</li> </ol>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Appareillage et matériels
  • 6 Étalonnage
  • 7 Conditions d'essai
  • 8 Mode opératoire
  • 9 Détails concernant les modes opératoires applicables aux différents produits
  • 10 Rapport d'essai
  • Annexe A (normative) Programme d'étalonnage
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ