NF ISO 3977-3

NF ISO 3977-3

February 2005
Standard Current

Gas turbines - Procurement - Part 3 : design requirements

ISO 3977-3:2004 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.ISO 3977-3:2004 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), ISO 3977-3:2004 provides a basis.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2005

Number of pages

73 p.

Reference

NF ISO 3977-3

ICS Codes

27.040   Gas and steam turbines. Steam engines

Classification index

E37-501-3

Print number

1 - 28/01/2005

International kinship

ISO 3977-3:2004
Sumary
Gas turbines - Procurement - Part 3 : design requirements

ISO 3977-3:2004 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.

It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

ISO 3977-3:2004 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.

In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), ISO 3977-3:2004 provides a basis.

Replaced standards (1)
NF ISO 3977-3
September 2002
Standard Cancelled
Gas turbines - Procurement - Part 3 : design requirements

This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement. It is not intended to deal with local or national legislative requirements with which the installation may be required to conform. This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles. In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this part of ISO 3977 provides a basis.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    3
  • 4 Exigences fondamentales
    8
  • 4.1 Généralités
    8
  • 4.2 Conditions spécifiques du site
    8
  • 4.3 Exigences de fonctionnement
    9
  • 4.4 Exigences de service
    10
  • 4.5 Exigences relatives aux équipements rotatifs
    11
  • 4.6 Autres exigences relatives aux équipements
    14
  • 4.7 Vibrations et dynamique
    15
  • 5 Conditionnement et équipements auxiliaires
    19
  • 5.1 Conception de base de l'ensemble
    19
  • 5.2 Équipements auxiliaires
    22
  • 6 Commande et instrumentation
    37
  • 6.1 Systèmes de commande
    37
  • 6.2 Démarrage
    38
  • 6.3 Prise de charge
    38
  • 6.4 Diminution de charge et arrét
    38
  • 6.5 Ventilation et purge
    40
  • 6.6 Dosage du combustible
    40
  • 6.7 Régulation et limitation
    42
  • 6.8 Lutte antipollution
    44
  • 6.9 Contrôle de survitesse
    44
  • 6.10 Systèmes de protection
    45
  • 6.11 Systèmes de lavage de compresseur
    48
  • 6.12 Considérations relatives au système de commande
    48
  • 6.13 Installation du tableau de commande
    50
  • 6.14 Exploitabilité et diagnostic
    50
  • 6.15 Communications des données
    50
  • 6.16 Applications spéciales
    50
  • Annexe A (informative) Fiches techniques
    52
  • Annexe B (informative) Liste des normes nationales ou internationales adéquates
    64
  • Bibliographie
    66
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ