NF ISO 603-15

NF ISO 603-15

December 2022
Standard Current

Bonded abrasive products - Dimensions - Part 15 : Cutting-off wheels on stationary or mobile cutting-off machines

This document specifies the most common nominal dimensions, in millimetres, of: —    shape type 41: flat cutting-off wheel; —    shape type 42: depressed centre cutting-off wheel. These bonded abrasive products are intended to be used for cutting‑off of any workpiece using stationary or mobile cutting-off machines, both manually and mechanically guided. In the application that is manually guided, the workpiece is firmly clamped or stabilized by its own weight. The cutting‑off wheel is guided by the operator and the workpiece is fixed, or vice versa. This document does not specify limit deviations and run‑out tolerances, which are given in ISO 13942.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2022

Number of pages

14 p.

Reference

NF ISO 603-15

ICS Codes

25.100.70   Abrasives

Classification index

E75-202-15

Print number

1

International kinship

ISO 603-15:2022
Sumary
Bonded abrasive products - Dimensions - Part 15 : Cutting-off wheels on stationary or mobile cutting-off machines

This document specifies the most common nominal dimensions, in millimetres, of:

—    shape type 41: flat cutting-off wheel;

—    shape type 42: depressed centre cutting-off wheel.

These bonded abrasive products are intended to be used for cutting‑off of any workpiece using stationary or mobile cutting-off machines, both manually and mechanically guided. In the application that is manually guided, the workpiece is firmly clamped or stabilized by its own weight. The cutting‑off wheel is guided by the operator and the workpiece is fixed, or vice versa.

This document does not specify limit deviations and run‑out tolerances, which are given in ISO 13942.

Replaced standards (1)
NF ISO 603-15
December 1999
Standard Cancelled
Bonded abrasive products - Dimensions - Part 15 : grinding wheels for cutting-off on stationary or mobile cutting-off machines

<p> La présente partie de l'ISO 603 spécifie les dimensions nominales, en millimètres, des meules de:- Type 41: Meule plate à tronçonner- Type 42: Meule à tronçonner à moyeu déportéCes produits abrasifs agglomérés sont utilisés pour le tronçonnage ou le rainurage de parties quelconques d'une pièce. La pièce travaillée est fermement bridée ou rendue stable par l'effet de son propre poids. La meule à tronçonner est soit guidée manuellement, soit fixe, et la pièce travaillée est soit fixe, soit guidée manuellement. La machine à tronçonner est fixe pendant l'opération. </p>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Types de formes et dimensions
  • 5 Désignation
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ