NF ISO 6133

NF ISO 6133

December 2015
Standard Current

Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ISO 6133:2015 specifies five methods of calculating, after testing, the tear strength and the adhesion strength of vulcanized rubber or fabrics coated with or adhered to rubber or plastics. The results are calculated by determining the median and range of peak values from a graphical plot of force versus time recorded during the test.A trace for an adhesion strength test or tear strength test can show few or many force peaks, depending on the material under investigation. The choice of the method of calculation depends on the number of peaks in the trace.The purpose of this International Standard is to obtain more uniformity in the evaluation and presentation of test results. It is applicable only, however, when specified in another International Standard, i.e. a method of test or a specification.For other details, such as apparatus, test piece preparation, conditioning, procedure, etc., requirements given in the relevant International Standard shall apply.NOTE In certain cases, the methods of analysis given might not be adequate, for example, for peak values showing a trend with time. In cases where the minimum force values are of interest, it is possible to use the same methods of calculation as when determining from a range of peak values.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2015

Number of pages

9 p.

Reference

NF ISO 6133

ICS Codes

83.060   Rubber
83.080.01   Plastics in general

Classification index

T46-055

Print number

1

International kinship

Sumary
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ISO 6133:2015 specifies five methods of calculating, after testing, the tear strength and the adhesion strength of vulcanized rubber or fabrics coated with or adhered to rubber or plastics. The results are calculated by determining the median and range of peak values from a graphical plot of force versus time recorded during the test.

A trace for an adhesion strength test or tear strength test can show few or many force peaks, depending on the material under investigation. The choice of the method of calculation depends on the number of peaks in the trace.

The purpose of this International Standard is to obtain more uniformity in the evaluation and presentation of test results. It is applicable only, however, when specified in another International Standard, i.e. a method of test or a specification.

For other details, such as apparatus, test piece preparation, conditioning, procedure, etc., requirements given in the relevant International Standard shall apply.

NOTE In certain cases, the methods of analysis given might not be adequate, for example, for peak values showing a trend with time. In cases where the minimum force values are of interest, it is possible to use the same methods of calculation as when determining from a range of peak values.

Replaced standards (1)
NF ISO 6133
September 2005
Standard Cancelled
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Le présent document spécifie cinq méthodes pour le calcul, après essais, de la résistance au déchirement et de la force d'adhérence du caoutchouc vulcanisé sur lui-même ou sur un support textile ou plastique.

Table of contents
  • 1 Domaine d'application
  • 2 Termes et définitions
  • 3 Mode opératoire
  • 4 Rapport d'analyse du tracé
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ