NF ISO 7176-1

NF ISO 7176-1

November 2014
Standard Current

Wheelchairs - Part 1 : determination of static stability

ISO 7176-1:2014 specifies test methods for determining the static stability of wheelchairs. It is applicable to manual and electrically powered wheelchairs, including scooters, with a maximum speed not greater than 15 km/h, intended to provide indoor and/or outdoor mobility for one disabled person whose mass is within the range represented by ISO 7176‑11. For active stability-controlled wheelchairs, ISO 7176-1:2014 applies to the device in a stable, parked state. ISO 7176-1:2014 provides a method for the measurement of the tipping angles (either wheelchair tipping angle or anti-tip device tipping angle), but this method is not applicable to wheelchairs with lateral anti-tip devices and does not consider sliding on the ground. ISO 7176-1:2014 also includes requirements for test reports and information disclosure.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2014

Number of pages

34 p.

Reference

NF ISO 7176-1

ICS Codes

11.180.10   Aids and adaptation for moving

Classification index

S90-612-1

Print number

1

International kinship

ISO 7176-1:2014
Sumary
Wheelchairs - Part 1 : determination of static stability

ISO 7176-1:2014 specifies test methods for determining the static stability of wheelchairs. It is applicable to manual and electrically powered wheelchairs, including scooters, with a maximum speed not greater than 15 km/h, intended to provide indoor and/or outdoor mobility for one disabled person whose mass is within the range represented by ISO 7176‑11.

For active stability-controlled wheelchairs, ISO 7176-1:2014 applies to the device in a stable, parked state.

ISO 7176-1:2014 provides a method for the measurement of the tipping angles (either wheelchair tipping angle or anti-tip device tipping angle), but this method is not applicable to wheelchairs with lateral anti-tip devices and does not consider sliding on the ground.

ISO 7176-1:2014 also includes requirements for test reports and information disclosure.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principes
    3
  • 4.1 Stabilité statique
    3
  • 4.2 Efficacité des dispositifs anti-basculement
    4
  • 5 Appareillage d'essai
    4
  • 6 Procédure de réglage
    5
  • 7 Procédure d'essai générale
    6
  • 8 Essai de stabilité statique avant
    7
  • 8.1 Généralités
    7
  • 8.2 Roues déverrouillées et fauteuil roulant dans sa configuration la moins stable
    7
  • 8.3 Roues aval verrouillées et fauteuil roulant dans sa configuration la moins stable
    9
  • 8.4 Roues déverrouillées et fauteuil roulant dans sa configuration la plus stable
    10
  • 8.5 Roues aval verrouillées et fauteuil roulant dans sa configuration la plus stable
    11
  • 9 Essai de stabilité statique vers l'arrière
    11
  • 9.1 Généralités
    11
  • 9.2 Roues déverrouillées et fauteuil roulant dans sa configuration la moins stable
    12
  • 9.3 Roues verrouillées et fauteuil roulant dans sa configuration la moins stable
    13
  • 9.4 Roues déverrouillées et fauteuil roulant dans sa configuration la plus stable
    15
  • 9.5 Roues verrouillées et fauteuil roulant dans sa configuration la plus stable
    15
  • 10 Essai de stabilité statique latérale
    15
  • 10.1 Généralités
    15
  • 10.2 Fauteuil roulant dans la configuration la moins stable
    16
  • 10.3 Fauteuil roulant dans la configuration la plus stable
    21
  • 11 Essai de stabilité statique avec dispositifs anti-basculement avant ou arrière
    21
  • 11.1 Généralités
    21
  • 11.2 Dispositifs anti-basculement dans leur configuration la moins efficace
    21
  • 11.3 Dispositifs anti-basculement dans leur configuration la plus efficace
    25
  • 11.4 Essai d'efficacité des dispositifs anti-basculement
    25
  • 12 Rapport d'essai
    26
  • 13 Diffusion des informations
    27
  • Annexe A (informative) Moyen d'empêcher les roues et béquilles anti-bascule de glisser
    29
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ