NF ISO 7176-19

NF ISO 7176-19

November 2014
Standard Cancelled

Wheelchairs - Part 19 : wheeled mobility devices for use as seats in motor vehicles

ISO 7176-19:2008 applies to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 22 kg. ISO 7176-19:2008 specifies wheelchair design requirements, performance requirements and associated test methods, and requirements for wheelchair labelling, presale literature, user instructions and user warnings. It applies to complete wheelchairs, including a base frame and seating system, as well as to wheelchairs equipped with add-on adaptive components designed to facilitate compliance with one or more of the requirements.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2014

Number of pages

51 p.

Reference

NF ISO 7176-19

ICS Codes

11.180.10   Aids and adaptation for moving

Classification index

S90-612-19

Print number

1

International kinship

ISO 7176-19:2008
Sumary
Wheelchairs - Part 19 : wheeled mobility devices for use as seats in motor vehicles

ISO 7176-19:2008 applies to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 22 kg. ISO 7176-19:2008 specifies wheelchair design requirements, performance requirements and associated test methods, and requirements for wheelchair labelling, presale literature, user instructions and user warnings. It applies to complete wheelchairs, including a base frame and seating system, as well as to wheelchairs equipped with add-on adaptive components designed to facilitate compliance with one or more of the requirements.

Standard replaced by (1)
NF ISO 7176-19
May 2022
Standard Current
Wheelchairs - Part 19 : wheelchairs for use as seats in motor vehicles

This document specifies test methods, requirements and recommendations for wheelchairs intended for use as seats in motor vehicles related to design, performance, labelling, presale literature, user instructions and user warnings. This document is applicable to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 12 kg. This document is applicable to complete wheelchairs, including a frame or powerbase and seating system. It is also applicable to wheelchairs equipped with additional components designed to facilitate conformity with one or more of the requirements of this document.

Table of contents
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences de conception
    6
  • 5 Exigences de performance
    11
  • 6 Exigences en matière d'identification, d'étiquetage, d'instructions d'utilisation, d'avertissement et de communication
    14
  • 7 Documents de conformité
    19
  • Annexe A (normative) Méthode relative à l'essai de choc frontal
    21
  • Annexe B (normative) Spécifications géométriques relatives aux points de fixation sur les fauteuils roulants destinés à être fixés à l'aide de systèmes de sangles d'attache à quatre points
    30
  • Annexe C (normative) Méthode pour soumettre à essai l'accessibilité des points de fixation de fauteuil roulant prévus pour la fixation des systèmes de sangles d'attache à quatre points
    33
  • Annexe D (normative) Méthodes d'évaluation des fauteuils roulants en termes de capacité d'accueil des dispositifs de retenue par ceinture fixés au véhicule
    36
  • Annexe E (informative) Lignes directrices relatives aux systèmes d'attache de substitution
    41
  • Annexe F (normative) Spécifications relatives à la géométrie de l'interface d'arrimage universelle du fauteuil roulant (UDIG)
    43
  • Bibliographie
    48
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ