Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

ISO 7743:2004 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber, using a standard test piece, a product or a part of a product.Three procedures are given:using a standard test piece with the metal plates lubricated;using a standard test piece with the metal plates bonded to the test piece;using a product or a part of a product with the metal plates lubricated.The three procedures do not give the same results. With lubricated test pieces, the results are dependent only on the modulus of the rubber and are independent of the test piece shape, provided that complete slip conditions are achieved. Effective lubrication is sometimes difficult to achieve, however, and it is prudent to inspect the variance in the test results from replicate test pieces for indications of erratic slip conditions. With bonded test pieces, the results are dependent on both the modulus of the rubber and the test piece shape. The dependence on test piece shape is strong and consequently the results will be markedly different from those obtained with lubricated test pieces. For products, the result is dependent on the shape, but as tests on products are mainly comparative this is acceptable.NOTE For well-specified product shapes, such as O-rings, the result may be correlated to the hardness value.The method is not suitable for materials that exhibit high set.

View the extract

Main informations

Collections

National standards and national normative documents

Publication date

January 2006

Number of pages

21 p.

Reference

NF ISO 7743

ICS Codes

83.060 Rubber

Classification index

T46-062

Print number

1 - 22/12/2005

International kinship

ISO 7743:2004

Sumary

Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

ISO 7743:2004 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber, using a standard test piece, a product or a part of a product.

Three procedures are given:

using a standard test piece with the metal plates lubricated;
using a standard test piece with the metal plates bonded to the test piece;
using a product or a part of a product with the metal plates lubricated.

The three procedures do not give the same results. With lubricated test pieces, the results are dependent only on the modulus of the rubber and are independent of the test piece shape, provided that complete slip conditions are achieved. Effective lubrication is sometimes difficult to achieve, however, and it is prudent to inspect the variance in the test results from replicate test pieces for indications of erratic slip conditions. With bonded test pieces, the results are dependent on both the modulus of the rubber and the test piece shape. The dependence on test piece shape is strong and consequently the results will be markedly different from those obtained with lubricated test pieces. For products, the result is dependent on the shape, but as tests on products are mainly comparative this is acceptable.

NOTE For well-specified product shapes, such as O-rings, the result may be correlated to the hardness value.

The method is not suitable for materials that exhibit high set.

Standard replaced by (1)

NF ISO 7743

August 2008

Standard Cancelled

Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

ISO 7743:2008 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber using a standard test piece, a product or a part of a product. Three methods are given: using a standard test piece with the metal plates lubricated; using a standard test piece with the metal plates bonded to the test piece; using a product or a part of a product with the metal plates lubricated. The three methods do not give the same results. With lubricated test pieces, the results are dependent only on the modulus of the rubber and are independent of the test piece shape, provided that complete slip conditions are achieved. Effective lubrication is sometimes difficult to achieve, however, and it is prudent to inspect the variance in the test results from replicate test pieces for indications of erratic slip conditions. With bonded test pieces, the results are dependent on both the modulus of the rubber and the test piece shape. The dependence on test piece shape is strong and consequently the results will be markedly different from those obtained with lubricated test pieces. For products, the result is dependent on the shape, but as tests on products are mainly comparative this is acceptable. NOTE For well-specified product shapes, such as O‑rings, the result may be correlated to the hardness value. The methods are not suitable for materials that exhibit high set.

Table of contents

Avant-propos
iv
Introduction
v
1 Domaine d'application
1
2 Références normatives
2
3 Termes et définitions
2
4 Principe
3
5 Appareillage et matériaux
3
6 Éprouvettes
4
7 Nombre d'éprouvettes
4
8 Délai entre la vulcanisation et l'essai
4
9 Conditionnement
4
10 Température d'essai
5
11 Mode opératoire
5
12 Expression des résultats
6
13 Rapport d'essai
7
Annexe A (informative) Extrapolation des résultats aux éprouvettes non normalisées
8
Annexe B (normative) Étalonnage
11
Bibliographie
13

ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ