NF ISO 813

NF ISO 813

October 2010
Standard Cancelled

Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method

ISO 813:2010 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°. The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes. This method is not suitable for high-hardness rubbers, typically above 85 IRHD.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2010

Number of pages

14 p.

Reference

NF ISO 813

ICS Codes

83.060   Rubber

Classification index

T46-058

Print number

1 - 08/10/2010

International kinship

ISO 813:2010
Sumary
Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method

ISO 813:2010 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.

The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes.

This method is not suitable for high-hardness rubbers, typically above 85 IRHD.

Replaced standards (1)
NF ISO 813
December 2004
Standard Cancelled
Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method

Standard replaced by (1)
NF ISO 813
July 2016
Standard Cancelled
Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method

<p>ISO 813:2016 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90°.</p> <p>The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes.</p> <p>This method is not suitable for high-hardness rubbers, typically above 85 IRHD.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Principe
    1
  • 4 Appareillage
    2
  • 5 Éprouvettes
    2
  • 5.1 Dimensions
    2
  • 5.2 Préparation
    3
  • 5.3 Nombre
    4
  • 5.4 Conditionnement avant essai
    4
  • 6 Température d'essai et humidité
    5
  • 7 Mode opératoire
    5
  • 8 Expression des résultats
    5
  • 8.1 Force d'adhérence
    5
  • 8.2 Symboles caractérisant le décollement
    5
  • 9 Fidélité
    6
  • 10 Rapport d'essai
    6
  • Annexe A (informative) Analyse du comportement viscoélastique de la liaison
    7
  • Annexe B (normative) Programme d'étalonnage
    8
  • Bibliographie
    10
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ