IEC 61508-2:2010
Collections
International IEC standards
Publication date
April 2010
Number of pages
187 p.
Reference
IEC 61508-2:2010
IEC 61508-2:2010
April 2010
International standard
Current
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
Looking for deeper insights? Check out IEC 61508:2010 CMV, which includes commented versions of Parts 1 to 7 of IEC 61508. These commented versions highlight the changes made from previous editions and provide explanations from a world-leading expert on the reasons behind the most significant changes.IEC 61508-2:2010 applies to any safety-related system, as defined by IEC 61508-1, that contains at least:- one electrical, electronic or programmable electronic element;- applies to all elements within an E/E/PE safety-related system;- specifies how to refine the E/E/PE system safety requirements specification, developed in accordance with IEC 61508-1, into the E/E/PE system design requirements specification;- specifies the requirements for activities that are to be applied during the design and manufacture of the E/E/PE safety-related systems except software, which is dealt with in IEC 61508-3.These requirements include the application of techniques and measures that:- are graded against the safety integrity level, for the avoidance of, and control of, faults and failures;- specifies the information necessary for carrying out the installation, commissioning and final safety validation of the E/E/PE safety-related system;- provides requirements for the preparation of information and procedures needed by the user for the operation and maintenance of the E/E/PE safety-related systems;- specifies requirements to be met by the organisation carrying out any modification of the E/E/PE safety-related systems.This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104.This publication is of high relevance for Smart Grid.
Main informations
See more
See less
Sumary
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
Looking for deeper insights? Check out IEC 61508:2010 CMV, which includes commented versions of Parts 1 to 7 of IEC 61508. These commented versions highlight the changes made from previous editions and provide explanations from a world-leading expert on the reasons behind the most significant changes.
IEC 61508-2:2010 applies to any safety-related system, as defined by IEC 61508-1, that contains at least:
- one electrical, electronic or programmable electronic element;
- applies to all elements within an E/E/PE safety-related system;
- specifies how to refine the E/E/PE system safety requirements specification, developed in accordance with IEC 61508-1, into the E/E/PE system design requirements specification;
- specifies the requirements for activities that are to be applied during the design and manufacture of the E/E/PE safety-related systems except software, which is dealt with in IEC 61508-3.
These requirements include the application of techniques and measures that:
- are graded against the safety integrity level, for the avoidance of, and control of, faults and failures;
- specifies the information necessary for carrying out the installation, commissioning and final safety validation of the E/E/PE safety-related system;
- provides requirements for the preparation of information and procedures needed by the user for the operation and maintenance of the E/E/PE safety-related systems;
- specifies requirements to be met by the organisation carrying out any modification of the E/E/PE safety-related systems.
This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104.
This publication is of high relevance for Smart Grid.
Looking for deeper insights? Check out IEC 61508:2010 CMV, which includes commented versions of Parts 1 to 7 of IEC 61508. These commented versions highlight the changes made from previous editions and provide explanations from a world-leading expert on the reasons behind the most significant changes.
IEC 61508-2:2010 applies to any safety-related system, as defined by IEC 61508-1, that contains at least:
- one electrical, electronic or programmable electronic element;
- applies to all elements within an E/E/PE safety-related system;
- specifies how to refine the E/E/PE system safety requirements specification, developed in accordance with IEC 61508-1, into the E/E/PE system design requirements specification;
- specifies the requirements for activities that are to be applied during the design and manufacture of the E/E/PE safety-related systems except software, which is dealt with in IEC 61508-3.
These requirements include the application of techniques and measures that:
- are graded against the safety integrity level, for the avoidance of, and control of, faults and failures;
- specifies the information necessary for carrying out the installation, commissioning and final safety validation of the E/E/PE safety-related system;
- provides requirements for the preparation of information and procedures needed by the user for the operation and maintenance of the E/E/PE safety-related systems;
- specifies requirements to be met by the organisation carrying out any modification of the E/E/PE safety-related systems.
This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104.
This publication is of high relevance for Smart Grid.
See more
Voir moins
Replaced standards
(1)
IEC 61508-2:2000
May 2000
International standard
Cancelled
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see <a href="http://www.iec.ch/61508">www.iec.ch/61508</a>)
Intended to be used only after a thorough understanding of IEC 61508-1, which provides the overall framework for the achievement of functional safety. Has the status of a basic safety publication in accordance with IEC Guide 104.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ