ISO 26865:2009
Road vehicles - Brake lining friction materials - Standard performance test procedure for commercial vehicles with air brakes
ISO 26865:2009 applies to commercial vehicles of the categories M2, M3, N2, N3, O3 and O4, as defined in UNECE R.E.3, which are equipped with air brakes. ISO 26865:2009 applies during product development, product prototypes, product specification or validation, and ongoing series production, as defined in ISO 15484. When used in conjunction with other applicable standards or test procedures, ISO 26865:2009 is intended to provide a complete assessment of a friction material's adequacy for use in a certain application, market or vehicle platform. ISO 26865:2009 does not include performance requirements related to stopping distance or braking force distribution, under different vehicle conditions of speed, temperature, tyre-to-road adhesion, loads and operating conditions of the braking system, as indicated in Federal Codes or Regulations. ISO 26865:2009 specifies a single-ended inertia-dynamometer performance procedure, which is intended to standardize the various procedures for commercial vehicles equipped with air brakes into one unique procedure covering all performance requirements of interest. The test sequence includes performance evaluation for the following conditions: performance test before and after bedding; brake fade after bedding and after moderate temperature; sensitivity to temperature, speed and pressure influence; downhill simulation; brake recovery.
ISO 26865:2009 applies to commercial vehicles of the categories M2, M3, N2, N3, O3 and O4, as defined in UNECE R.E.3, which are equipped with air brakes.
ISO 26865:2009 applies during product development, product prototypes, product specification or validation, and ongoing series production, as defined in ISO 15484.
When used in conjunction with other applicable standards or test procedures, ISO 26865:2009 is intended to provide a complete assessment of a friction material's adequacy for use in a certain application, market or vehicle platform.
ISO 26865:2009 does not include performance requirements related to stopping distance or braking force distribution, under different vehicle conditions of speed, temperature, tyre-to-road adhesion, loads and operating conditions of the braking system, as indicated in Federal Codes or Regulations.
ISO 26865:2009 specifies a single-ended inertia-dynamometer performance procedure, which is intended to standardize the various procedures for commercial vehicles equipped with air brakes into one unique procedure covering all performance requirements of interest.
The test sequence includes performance evaluation for the following conditions:
- performance test before and after bedding;
- brake fade after bedding and after moderate temperature;
- sensitivity to temperature, speed and pressure influence;
- downhill simulation;
- brake recovery.
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ