NF EN ISO 11148-3
Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers
ISO 11148-3:2010 applies to hand-held non-electric power tools (hereafter referred to as “drills and tappers”) intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete, plastics, etc., or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-3:2010 is applicable to drills, heavy duty drills with two handles and tappers. Examples of drills and tappers covered by ISO 11148-3:2010 are shown. ISO 11148-3:2010 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. ISO 11148-3:2010 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.
ISO 11148-3:2010 applies to hand-held non-electric power tools (hereafter referred to as “drills and tappers”) intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete, plastics, etc., or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-3:2010 is applicable to drills, heavy duty drills with two handles and tappers. Examples of drills and tappers covered by ISO 11148-3:2010 are shown.
ISO 11148-3:2010 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures.
ISO 11148-3:2010 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.
Le présent document fait partie d'une série de normes destinées à respecter les exigences essentielles de sécurité et de santé relatives à la conception et à la construction des machines portatives non électriques. Il énumère les risques significatifs engendrés par les perceuses rotatives et les taraudeuses et spécifie les prescriptions de sécurité correspondantes. Il vient à l'appui des Directives "Machines" 98/37/CE et 2006/42/CE.
<p>ISO 11148-3:2012 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.</p> <p>ISO 11148-3:2012 is applicable to drills, heavy duty drills with two handles and tappers. </p> <p>ISO 11148-3:2012 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures.</p> <p>ISO 11148-3:2012 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.</p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives2
-
3 Termes et définitions3
-
3.1 Définitions générales3
-
3.2 Définitions relatives aux perceuses et aux taraudeuses4
-
4 Exigences de sécurité et/ou mesures de prévention5
-
4.1 Généralités5
-
4.2 Sécurité mécanique5
-
4.3 Sécurité thermique6
-
4.4 Bruit6
-
4.5 Vibrations7
-
4.6 Matériaux et produits traités, utilisés ou dégagés8
-
4.7 Ergonomie8
-
4.8 Commandes9
-
5 Vérification10
-
5.1 Conditions générales des essais10
-
5.2 Bruit10
-
5.3 Vibrations10
-
5.4 Démarrage intempestif10
-
5.5 Fabrication de la machine portative10
-
5.6 Structure de vérification des exigences de sécurité11
-
6 Informations pour l'utilisation12
-
6.1 Marquage, signes et avertissements écrits12
-
6.2 Notice d'instructions12
-
6.3 Instructions de fonctionnement18
-
6.4 Données18
-
6.5 Instructions pour la maintenance19
- Annexe A (informative) Liste des phénomènes dangereux significatifs20
- Annexe B (informative) Exemples de perceuses et de taraudeuses couvertes par la présente partie de l'ISO 1114822
- Annexe C (normative) Symboles pour étiquettes et signes24
- Annexe D (normative) Exigences de sécurité supplémentaires relatives aux machines à moteur à combustion interne25
- Bibliographie29
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ