NF EN ISO 11200

NF EN ISO 11200

July 2014
Standard Current

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

ISO 11200:2014 is the frame standard introducing the basic group, ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205, on the determination of emission sound pressure levels at work stations and other specified positions. It gives guidance for:facilitating the writing of noise test codes;providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3);comparing the different measurement methods offered by the group;facilitating the choice of the most appropriate method(s) in typical practical situations.ISO 11200:2014 applies to airborne sound only. It is for use in noise testing, in general, and in the preparation of noise test codes, in particular.A standardized noise test code is intended to select standards from the ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205 group, which are the most appropriate to the machinery family it covers, and which give detailed requirements on mounting and operating conditions for the particular family, as well as the location of the work station(s) and other specified positions as prescribed in these International Standards.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2014

Number of pages

47 p.

Reference

NF EN ISO 11200

ICS Codes

17.140.20   Noise emitted by machines and equipment

Classification index

S31-500

Print number

1

International kinship

ISO 11200:2014

European kinship

EN ISO 11200:2014
Sumary
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

ISO 11200:2014 is the frame standard introducing the basic group, ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205, on the determination of emission sound pressure levels at work stations and other specified positions. It gives guidance for:

  • facilitating the writing of noise test codes;
  • providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3);
  • comparing the different measurement methods offered by the group;
  • facilitating the choice of the most appropriate method(s) in typical practical situations.

ISO 11200:2014 applies to airborne sound only. It is for use in noise testing, in general, and in the preparation of noise test codes, in particular.

A standardized noise test code is intended to select standards from the ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205 group, which are the most appropriate to the machinery family it covers, and which give detailed requirements on mounting and operating conditions for the particular family, as well as the location of the work station(s) and other specified positions as prescribed in these International Standards.

Replaced standards (1)
NF EN ISO 11200
November 2009
Standard Cancelled
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and other specified positions

Le présent document donne un résumé succinct des normes internationales de base qui permettent de déterminer les niveaux de pression acoustique d'émission de tous types de machines et d'équipements, au poste de travail et en d'autres positions spécifiées. Il constitue un guide pour le choix de la norme appropriée à un type de machine ou d'équipement donné. Il vient à l'appui des exigences essentielles de la Directive Nouvelle approche 98/37/CE, amendée par la directive 98/79/CE, ainsi que de la Directive Nouvelle approche 2006/42/CE sur les machines.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    3
  • 4 Niveau de pression acoustique d'émission aux postes de travail et en d'autres positions spécifiées
    9
  • 5 Aperçu des méthodes proposées dans l'ensemble de normes ISO 11201, ISO 11202, ISO 11203, ISO 11204 et ISO 11205 pour la détermination du niveau de pression acoustique d'émission aux postes de travail et en d'autres positions spécifiées
    11
  • 6 Choix de la méthode la plus appropriée
    16
  • 7 Choix des positions spécifiées
    23
  • 8 Traitement de l'incertitude de mesure dans les ISO 11201, 11202 et 11204
    24
  • Annexe A (informative) Site d'essai et correction d'environnement K2 - Recommandations
    25
  • Annexe B (informative) Études de cas
    27
  • Bibliographie
    38
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ