NF EN ISO 13164-3

NF EN ISO 13164-3

February 2020
Standard Current

Water quality - Radon-222 - Part 3 : test method using emanometry

ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l−1 to several hundred thousand becquerels per litre for a 100 ml test sample.This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices.This test method can be applied on field sites or in the laboratory.Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Sécurité, Gestion des risques et SST, QSE

Publication date

February 2020

Number of pages

33 p.

Reference

NF EN ISO 13164-3

ICS Codes

13.280   Radiation protection
17.240   Radiation measurements
27.120.01   Nuclear energy in general

Classification index

M60-761-3

Print number

1

International kinship

ISO 13164-3:2013

European kinship

EN ISO 13164-3:2020
Sumary
Water quality - Radon-222 - Part 3 : test method using emanometry

ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.

The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l−1 to several hundred thousand becquerels per litre for a 100 ml test sample.

This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices.

This test method can be applied on field sites or in the laboratory.

Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring

Replaced standards (1)
NF ISO 13164-3
November 2013
Standard Cancelled
Water quality - Radon-222 - Part 3 : test method using emanometry

ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h. The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, range from 0,1 Bq l−1 to several hundred thousand becquerels per litre for a 100 ml test sample. This test method is used successfully with drinking water samples. The laboratory is responsible for ensuring the validity of this test method for water samples of untested matrices. This test method can be applied on field sites or in the laboratory. Annexes A and B give indications on the necessary counting conditions to meet the required sensitivity for drinking water monitoring

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes, définitions et symboles
  • 4 Principe
  • 5 Échantillonnage
  • 6 Transport et conservation
  • 7 Transfert du radon par dégazage
  • 8 Détection
  • 9 Programme d'assurance qualité et de contrôle de la qualité
  • 10 Expression des résultats
  • 11 Étalonnage
  • 12 Rapport d'essai
  • Annexe A Exemples de méthodes de mesures utilisant des fioles scintillantes
  • Annexe B Exemple de méthode de mesure utilisant une chambre d'ionisation
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ