NF EN ISO 28927-9

NF EN ISO 28927-9

August 2010
Standard Current

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9 : scaling hammars and needle scalers

ISO 28927-9:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven scaling hammers and needle scalers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.ISO 28927-9:2009 is applicable to engraving pens, scabblers, scaling hammers and needle scalers, driven pneumatically or by other means, intended for paint, rust or scale removal with reciprocating work tools or needles and for all kinds of materials.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Gestion des risques et SST, QSE, Sécurité

Publication date

August 2010

Number of pages

27 p.

Reference

NF EN ISO 28927-9

ICS Codes

13.160   Vibration and shock with respect to human beings
17.160   Vibrations, shock and vibration measurements
25.140.10   Pneumatic tools
25.140.20   Electric tools

Classification index

E90-321-9

Print number

1 - 19/08/2010

International kinship

ISO 28927-9:2009

European kinship

EN ISO 28927-9:2009
Sumary
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9 : scaling hammars and needle scalers

ISO 28927-9:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven scaling hammers and needle scalers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine.

ISO 28927-9:2009 is applicable to engraving pens, scabblers, scaling hammers and needle scalers, driven pneumatically or by other means, intended for paint, rust or scale removal with reciprocating work tools or needles and for all kinds of materials.

Replaced standards (1)
NF EN ISO 8662-14
January 1997
Standard Cancelled
Hand-held portable power tools. Measurement of vibrations at the hangle. Part 14 : stone-working tools and needle scalers.

Table of contents
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et symboles
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Symboles
    2
  • 4 Normes de référence et codes d'essai de vibrations
    3
  • 5 Description de la famille de machines
    3
  • 6 Caractérisation des vibrations
    5
  • 6.1 Direction du mesurage
    5
  • 6.2 Emplacement des mesurages
    5
  • 6.3 Amplitude des vibrations
    7
  • 6.4 Combinaison des directions de vibrations
    7
  • 7 Exigences pour l'appareillage
    8
  • 7.1 Généralités
    8
  • 7.2 Montage des transducteurs
    8
  • 7.3 Filtre de pondération fréquentielle
    8
  • 7.4 Durée d'intégration
    8
  • 7.5 Équipement auxiliaire
    8
  • 7.6 Étalonnage
    9
  • 8 Conditions d'essai et de fonctionnement de la machine
    9
  • 8.1 Généralités
    9
  • 8.2 Conditions de fonctionnement
    9
  • 8.3 Autres valeurs à spécifier
    10
  • 8.4 Équipement accessoire, pièce et tâche
    10
  • 8.5 Opérateur
    11
  • 9 Mode opératoire de mesure et validation
    11
  • 9.1 Valeurs de vibrations consignées
    11
  • 9.2 Déclaration et vérification des valeurs d'émission vibratoire
    12
  • 10 Rapport d'essai
    12
  • Annexe A (informative) Modèle de rapport d'essai pour les émissions de vibrations des marteaux dérouilleurs et des marteaux à aiguilles
    13
  • Annexe B (normative) Détermination de l'incertitude
    15
  • Bibliographie
    17
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ