NF ISO 10265
Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems
ISO 10265:2008 specifies minimum performance criteria and test methods to enable uniform assessment of the service, secondary and parking brake systems of crawler machines. It is applicable to self-propelled crawler machines, as defined in ISO 6165 including derivative earth-moving machines with rubber tracks, with a maximum design speed of 20 km/h or less. This International Standard does not cover those machines that fall under ISO 17063 or wheeled machines equipped with over-the-tyre tracks. Crawler machines with maximum design speed greater than 20 km/h conform to ISO 3450.
ISO 10265:2008 specifies minimum performance criteria and test methods to enable uniform assessment of the service, secondary and parking brake systems of crawler machines.
It is applicable to self-propelled crawler machines, as defined in ISO 6165 including derivative earth-moving machines with rubber tracks, with a maximum design speed of 20 km/h or less. This International Standard does not cover those machines that fall under ISO 17063 or wheeled machines equipped with over-the-tyre tracks. Crawler machines with maximum design speed greater than 20 km/h conform to ISO 3450.
<p> La présente Norme internationale prescrit les performances minimales et les critères d'essai, de façon à permettre une évaluation uniforme des systèmes de freinage de service, de secours et de stationnement d'engins chenillés. Elle s'applique aux engins chenillés automoteurs tels que définis dans l'ISO 6165, dont la vitesse maximale nominale est de 20 km/h et dont la masse est égale ou inférieure à 100 000 kg. </p>
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Termes et définitions2
-
4 Exigences générales4
-
4.1 Dispositifs de freinage requis4
-
4.2 Commandes de freins4
-
4.3 Composants communs5
-
4.4 Dispositif d'avertissement pour sources d'énergie pouvant être évacuées5
-
4.5 Systèmes de freinage avec un système de commande électronique6
-
5 Conditions d'essai6
-
5.1 Site des essais6
-
5.2 Préparation des essais6
-
5.3 Instrumentation7
-
5.4 Moyens de remorquage et traction7
-
6 Critères d'essai et de performance des dispositifs de freinage7
-
6.1 Essais des freins de service et de secours7
-
6.2 Essais relatifs au frein de stationnement9
-
6.3 Vérification analytique et vérification du niveau des composants9
-
7 Instructions relatives à l'engin et étiquettes10
-
8 Rapport d'essai10
- Bibliographie12
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ