NF ISO 11338-1

NF ISO 11338-1

September 2005
Standard Current

Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1 : sampling

ISO 11338-1:2003 describes methods for the determination of the mass concentration of polycyclic aromatic hydrocarbons (PAHs) in flue gas emissions from stationary sources such as aluminium smelters, coke works, waste incinerators, power stations, and industrial and domestic combustion appliances. ISO 11338-1:2003 describes three sampling methods, which are here regarded as of equivalent value, and specifies the minimum requirements for effective PAH sampling. The three sampling methods are the dilution method (A), the heated filter/condenser/adsorber method (B) and the cooled probe/adsorber method (C). All three methods are based on representative isokinetic sampling, as the PAHs are commonly associated with particles in flue gas. Information is provided to assist in the choice of the appropriate sampling method for the measurement application under consideration. ISO 11338-1:2003 is not applicable to the sampling of fugitive releases of PAHs. NOTE Methods for sample preparation, clean-up and analysis are described in ISO 11338-2 and are intended to be combined with one of the sampling methods described in ISO 11338-1 to complete the whole measurement procedure.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2005

Number of pages

34 p.

Reference

NF ISO 11338-1

ICS Codes

13.040.40   Stationary source emissions

Classification index

X43-400-1

Print number

1 - 20/09/2005

International kinship

ISO 11338-1:2003
Sumary
Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1 : sampling

ISO 11338-1:2003 describes methods for the determination of the mass concentration of polycyclic aromatic hydrocarbons (PAHs) in flue gas emissions from stationary sources such as aluminium smelters, coke works, waste incinerators, power stations, and industrial and domestic combustion appliances.

ISO 11338-1:2003 describes three sampling methods, which are here regarded as of equivalent value, and specifies the minimum requirements for effective PAH sampling. The three sampling methods are the dilution method (A), the heated filter/condenser/adsorber method (B) and the cooled probe/adsorber method (C). All three methods are based on representative isokinetic sampling, as the PAHs are commonly associated with particles in flue gas.

Information is provided to assist in the choice of the appropriate sampling method for the measurement application under consideration.

ISO 11338-1:2003 is not applicable to the sampling of fugitive releases of PAHs.

NOTE Methods for sample preparation, clean-up and analysis are described in ISO 11338-2 and are intended to be combined with one of the sampling methods described in ISO 11338-1 to complete the whole measurement procedure.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principes et exigences minimales pour les trois méthodes d'échantillonnage
    2
  • 4.1 Principes
    2
  • 4.2 Exigences minimales générales applicables à l'ensemble des méthodes d'échantillonnage
    2
  • 4.3 Préparations d'ordre général et échantillonnage
    3
  • 5 Méthode A - Méthode de dilution
    4
  • 5.1 Principe
    4
  • 5.2 Exigences minimales
    5
  • 5.3 Préparation et échantillonnage
    5
  • 6 Méthode B - Méthode de filtre/condenseur/adsorbant (avec chauffage)
    7
  • 6.1 Principe
    7
  • 6.2 Exigences minimales
    8
  • 6.3 Préparation et échantillonnage
    8
  • 7 Méthode C - Méthode de sondage/adsorption avec refroidissement
    10
  • 7.1 Principe
    10
  • 7.2 Exigences minimales
    10
  • 7.3 Préparation et échantillonnage
    10
  • Annexe A (informative) Applicabilité des méthodes d'échantillonnage
    13
  • Annexe B (informative) Représentations schématiques, dimensions et matériaux de certains dispositifs d'échantillonnage soumis à l'essai
    15
  • Bibliographie
    26
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ