NF ISO 16638-2

NF ISO 16638-2

April 2020
Standard Cancelled

Radiological protection - Monitoring and internal dosimetry for specific materials - Part 2 : ingestion of uranium compounds

This document specifies the minimum requirements for the design of professional programmes to monitor workers exposed to a risk of ingestion to uranium compounds. This document establishes principles for the development of compatible goals and requirements for monitoring programmes and dose assessment for workers occupationally exposed to internal contamination. It establishes procedures and assumptions for risk analysis, monitoring programmes and the standardized interpretation of monitoring data in order to achieve acceptable levels of reliability for uranium and its compounds. It sets limits for the applicability of the procedures in respect to dose levels above which more sophisticated methods need to be applied.This document addresses those circumstances when exposure could be constrained by either radiological or chemical toxicity concerns.This document addresses, for ingestion of uranium and its compounds, the following items:a) purposes of monitoring and monitoring programmes;b) description of the different categories of monitoring programmes;c) suitable methods for monitoring and criteria for their selection;d) information that is collected for the design of a monitoring programme;e) procedures for dose assessment based on reference levels for special monitoring programmes;f) criteria for determining the significance of monitoring results;g) uncertainties arising from dose assessment and interpretation of bioassays data;h) reporting/documentation;i) quality assurance;j) record keeping requirements.It is not applicable to the following items:a) detailed descriptions of measuring methods and techniques for uranium;b) modelling for the improvement of internal dosimetry;c) potential influence of counter-measures (e.g. administration of chelating agents);d) investigation of the causes or implications of an exposure;e) dosimetry for inhalation exposures and for contaminated wounds.

View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Sécurité, Gestion des risques et SST, QSE

Publication date

April 2020

Number of pages

33 p.

Reference

NF ISO 16638-2

ICS Codes

13.280   Radiation protection
17.240   Radiation measurements

Classification index

M60-604-2

Print number

1

International kinship

ISO 16638-2:2019
Sumary
Radiological protection - Monitoring and internal dosimetry for specific materials - Part 2 : ingestion of uranium compounds

This document specifies the minimum requirements for the design of professional programmes to monitor workers exposed to a risk of ingestion to uranium compounds. This document establishes principles for the development of compatible goals and requirements for monitoring programmes and dose assessment for workers occupationally exposed to internal contamination. It establishes procedures and assumptions for risk analysis, monitoring programmes and the standardized interpretation of monitoring data in order to achieve acceptable levels of reliability for uranium and its compounds. It sets limits for the applicability of the procedures in respect to dose levels above which more sophisticated methods need to be applied.

This document addresses those circumstances when exposure could be constrained by either radiological or chemical toxicity concerns.

This document addresses, for ingestion of uranium and its compounds, the following items:

a) purposes of monitoring and monitoring programmes;

b) description of the different categories of monitoring programmes;

c) suitable methods for monitoring and criteria for their selection;

d) information that is collected for the design of a monitoring programme;

e) procedures for dose assessment based on reference levels for special monitoring programmes;

f) criteria for determining the significance of monitoring results;

g) uncertainties arising from dose assessment and interpretation of bioassays data;

h) reporting/documentation;

i) quality assurance;

j) record keeping requirements.

It is not applicable to the following items:

a) detailed descriptions of measuring methods and techniques for uranium;

b) modelling for the improvement of internal dosimetry;

c) potential influence of counter-measures (e.g. administration of chelating agents);

d) investigation of the causes or implications of an exposure;

e) dosimetry for inhalation exposures and for contaminated wounds.

Standard replaced by (1)
NF EN ISO 16638-2
August 2022
Standard Current
Radiological Protection - Monitoring and internal dosimetry for specific materials - Part 2 : ingestion of uranium compounds

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles et abréviations
  • 5 Objectif et nécessité des programmes de surveillance
  • 6 Aspects généraux
  • 7 Programmes de surveillance spéciale
  • 8 Programmes de surveillance de chantier pour une surveillance individuelle
  • 9 Valeurs de référence comme critères de performance pour les laboratoires
  • 10 Assurance et contrôle de la qualité dans les laboratoires d'analyses médicales
  • 11 Procédure d'évaluation des expositions
  • 12 Transmission des résultats et documentation
  • Annexe A Données nucléaires des isotopes U-238 et U-235
  • Annexe B Classification par défaut des composés de l'uranium
  • Annexe C Techniques de mesurage de l'uranium en cas d'ingestion
  • Annexe D Taux d'excrétion pour l'ingestion de composés d'uranium
  • Annexe E Dose efficace engagée par unité d'incorporation après ingestion de composés d'uranium
  • Annexe F Estimation des incertitudes pour les estimations dosimétriques internes après ingestion
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ