NF ISO 20283-5

NF ISO 20283-5

March 2017
Standard Current

Mechanical vibration - Measurement of vibration on ships - Part 5 : guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

ISO 20283-5:2016 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on-board passenger and merchant ships, especially for crew. Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guideline values for different areas on ships.ISO 20283-5:2016 is applicable to passenger and merchant ships with intended voyages of 24 h or more.ISO 20283-5:2016 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‑1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‑2.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2017

Number of pages

17 p.

Reference

NF ISO 20283-5

ICS Codes

17.160   Vibrations, shock and vibration measurements
47.020.80   Accommodation spaces

Classification index

E90-972-5

Print number

1

International kinship

ISO 20283-5:2016
Sumary
Mechanical vibration - Measurement of vibration on ships - Part 5 : guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

ISO 20283-5:2016 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on-board passenger and merchant ships, especially for crew. Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guideline values for different areas on ships.

ISO 20283-5:2016 is applicable to passenger and merchant ships with intended voyages of 24 h or more.

ISO 20283-5:2016 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.

The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‑1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‑2.

Replaced standards (1)
NF ISO 6954
November 2014
Standard Cancelled
Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships

L'ISO 6954:2000 contient des lignes directrices pour l'évaluation des vibrations affectant l'habitabilité à bord d'un cargo ou d'un navire à passagers, ainsi que des exigences relatives à l'appareillage et à la méthode de mesure dans des espaces normalement occupés. L'évaluation des mouvements basse fréquence du navire, susceptibles de provoquer le mal de mer, est abordée par d'autres Normes internationales.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Instruments
  • 5 Emplacements et directions des mesurages
  • 6 Conditions de mesure
  • 7 Mode opératoire de mesure
  • 8 Évaluation
  • 9 Rapport d'essai
  • Annexe A (informative) Pondération en fréquence, W m
  • Annexe B (informative) Exemple de rapport d'évaluation de l'habitabilité à bord des navires conformément au présent document
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ