IEC 62040-2:2016
Collections
International IEC standards
Publication date
November 2016
Number of pages
92 p.
Reference
IEC 62040-2:2016
IEC 62040-2:2016
November 2016
International standard
Current
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62040-2:2016 is a type test product standard for electromagnetic compatibility (EMC) and applies to movable, stationary, fixed or built-in, pluggable and permanently connected UPS for use in low-voltage distribution systems with an environment being either residential, commercial, light industrial or industrial, which deliver output voltage with port voltages not exceeding 1 500 V DC or 1 000 V AC and which include an energy storage device. This edition includes the following significant technical changes with respect to the previous edition:a) the inclusion of network port limits in Table 1, Table 2 and Annex C for the sake of consistency with other standards;b) a change of quasi-peak limit for category C3 UPS in Table 2 for the sake of consistency with other standards;c) a clarification in Table 4 about the performance criteria for immunity tests;d) a revision of some test configurations in Annex A.The contents of the Interpretation sheet 1 of June 2018 have been included in this copy.
Main informations
See more
See less
Sumary
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62040-2:2016 is a type test product standard for electromagnetic compatibility (EMC) and applies to movable, stationary, fixed or built-in, pluggable and permanently connected UPS for use in low-voltage distribution systems with an environment being either residential, commercial, light industrial or industrial, which deliver output voltage with port voltages not exceeding 1 500 V DC or 1 000 V AC and which include an energy storage device. This edition includes the following significant technical changes with respect to the previous edition:
a) the inclusion of network port limits in Table 1, Table 2 and Annex C for the sake of consistency with other standards;
b) a change of quasi-peak limit for category C3 UPS in Table 2 for the sake of consistency with other standards;
c) a clarification in Table 4 about the performance criteria for immunity tests;
d) a revision of some test configurations in Annex A.
The contents of the Interpretation sheet 1 of June 2018 have been included in this copy.
IEC 62040-2:2016 is a type test product standard for electromagnetic compatibility (EMC) and applies to movable, stationary, fixed or built-in, pluggable and permanently connected UPS for use in low-voltage distribution systems with an environment being either residential, commercial, light industrial or industrial, which deliver output voltage with port voltages not exceeding 1 500 V DC or 1 000 V AC and which include an energy storage device. This edition includes the following significant technical changes with respect to the previous edition:
a) the inclusion of network port limits in Table 1, Table 2 and Annex C for the sake of consistency with other standards;
b) a change of quasi-peak limit for category C3 UPS in Table 2 for the sake of consistency with other standards;
c) a clarification in Table 4 about the performance criteria for immunity tests;
d) a revision of some test configurations in Annex A.
The contents of the Interpretation sheet 1 of June 2018 have been included in this copy.
See more
Voir moins
Replaced standards
(2)
IEC 62040-2:2005
October 2005
International standard
Cancelled
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this part of IEC 62040, before placing them on the market.The requirements have been selected so as to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations.
IEC 62040-2:2005/COR1:2011
November 2011
International standard
Current
Corrigendum 1 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ