IEC 62271-100:2008
Collections
International IEC standards
Publication date
April 2008
Number of pages
695 p.
Reference
IEC 62271-100:2008
IEC 62271-100:2008
April 2008
International standard
Cancelled
High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers
IEC 62271-100:2008 is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. It is only applicable to three-pole circuit-breakers for use in three-phase systems and single-pole circuit-breakers for use in single-phase systems. This second edition cancels and replaces the first edition published in 2001 and its amendments 1 (2002) and 2 (2006). It also cancels and replaces IEC 61633 and IEC 62271-308. The main changes with respect to the previous edition are listed below:- the introduction of harmonised (IEC and IEEE) TRV waveshapes for rated voltages of 100 kV and above (amendment 1 to the first edition);- the introduction of cable and line systems with their associated TRVs for rated voltages below 100 kV (amendment 2 to the first edition);- the inclusion of IEC 61633 and IEC 62271-308.This standard shall be read in conjunction with IEC 62271-1, first edition, published in 2007.
Main informations
See more
See less
Sumary
High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers
IEC 62271-100:2008 is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. It is only applicable to three-pole circuit-breakers for use in three-phase systems and single-pole circuit-breakers for use in single-phase systems. This second edition cancels and replaces the first edition published in 2001 and its amendments 1 (2002) and 2 (2006). It also cancels and replaces IEC 61633 and IEC 62271-308. The main changes with respect to the previous edition are listed below:
- the introduction of harmonised (IEC and IEEE) TRV waveshapes for rated voltages of 100 kV and above (amendment 1 to the first edition);
- the introduction of cable and line systems with their associated TRVs for rated voltages below 100 kV (amendment 2 to the first edition);
- the inclusion of IEC 61633 and IEC 62271-308.
This standard shall be read in conjunction with IEC 62271-1, first edition, published in 2007.
IEC 62271-100:2008 is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. It is only applicable to three-pole circuit-breakers for use in three-phase systems and single-pole circuit-breakers for use in single-phase systems. This second edition cancels and replaces the first edition published in 2001 and its amendments 1 (2002) and 2 (2006). It also cancels and replaces IEC 61633 and IEC 62271-308. The main changes with respect to the previous edition are listed below:
- the introduction of harmonised (IEC and IEEE) TRV waveshapes for rated voltages of 100 kV and above (amendment 1 to the first edition);
- the introduction of cable and line systems with their associated TRVs for rated voltages below 100 kV (amendment 2 to the first edition);
- the inclusion of IEC 61633 and IEC 62271-308.
This standard shall be read in conjunction with IEC 62271-1, first edition, published in 2007.
See more
Voir moins
Replaced standards
(7)
IEC 62271-100:2001/AMD1:2002
May 2002
International standard
Cancelled
Amendment 1 - High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers
The contents of the corrigenda of October 2002 and April 2003 have been included in this copy.
IEC 62271-100:2001/AMD1:2002/COR1:2002
October 2002
International standard
Cancelled
Corrigendum 1 to Amendment 1 - High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers
IEC TS 61633:1995
April 1995
Technical specification
Cancelled
High-voltage alternating current circuit-breakers - Guide for short-circuit and switching test procedures for metal-enclosed and dead tank circuit-breakers
Gives recommendations for test circuits and procedures for type testing relevant to short-circuit making and breaking and switching performance of metal enclosed and dead tank circuit-breakers. This publication has the status of a Technical Report - type 2.
IEC 62271-100:2001/AMD2:2006
July 2006
International standard
Cancelled
Amendment 2 - High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers
IEC TR 62271-308:2002
August 2002
Technical report
Cancelled
High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breaking test duty T100a
This technical report contains information and test procedures for type testing of circuit-breakers relevant to short-circuit breaking performance during asymmetrical test duty (T100a) as required by IEC 62271-100. This technical report covers all possible testing cases, i.e. single-phase, three-phase, direct tests, synthetic tests, first pole-to-clear factors 1,3 and 1,5.
IEC 62271-100:2001/AMD1:2002/COR2:2003
April 2003
International standard
Cancelled
Corrigendum 2 to Amendment 1 - High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers
IEC 62271-100:2001
May 2001
International standard
Cancelled
High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers
Is applicable to a.c. circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V.
See more
See less
See more
Standard replaced by
(1)
IEC 62271-100:2021
July 2021
International standard
Current
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC 62271-100:2021 is applicable to three-phase AC circuit-breakers designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and/or 60 Hz on systems having voltages above 1 000 V. This document includes only direct testing methods for making-breaking tests. For synthetic testing methods refer to IEC 62271-101. This third edition cancels and replaces the second edition published in 2008, Amendment 1:2012 and Amendment 2:2017. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: ? the document has been updated to IEC 62271-1:2017; ? Amendments 1 and 2 have been included; ? the definitions have been updated, terms not used have been removed; ? Subclauses 7.102 through 7.108 have been restructured. The contents of the corrigendum of December 2021, July 2022 and January 2024 have been included in this copy.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ