NF EN ISO 10052

NF EN ISO 10052

September 2005
Standard Cancelled

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method

ISO 10052:2004 specifies field survey methods for measuring:a) airborne sound insulation between rooms;b) impact sound insulation of floors;c) airborne sound insulation of facades; andd) sound pressure levels in rooms caused by service equipment.The methods described in ISO 10052:2004 are applicable to measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m 3 .

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2005

Number of pages

39 p.

Reference

NF EN ISO 10052

ICS Codes

17.140.20   Noise emitted by machines and equipment
91.120.20   Acoustics in building. Sound insulation
91.140.01   Installations in buildings in general

Classification index

S31-077

Print number

1 - 16/09/2005

International kinship

ISO 10052:2004

European kinship

EN ISO 10052:2004
Sumary
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method

ISO 10052:2004 specifies field survey methods for measuring:

a) airborne sound insulation between rooms;

b) impact sound insulation of floors;

c) airborne sound insulation of facades; and

d) sound pressure levels in rooms caused by service equipment.

The methods described in ISO 10052:2004 are applicable to measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m 3 .

Standard replaced by (1)
NF EN ISO 10052
July 2021
Standard Current
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method

This document specifies field survey methods for measuring a) airborne sound insulation between rooms, b) impact sound insulation of floors, c) airborne sound insulation of façades, and d) sound pressure levels in rooms caused by service equipment. The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3. For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft impact sound insulation, the results also are given as A-weighted maximum impact sound pressure level. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.

Table of contents
  • Avant-propos
    v
  • Introduction
    VI
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Grandeurs exprimées en valeurs uniques
    7
  • 5 Appareillage
    8
  • 6 Mode opératoire et évaluation
    8
  • 6.1 Généralités
    8
  • 6.2 Production du champ acoustique
    8
  • 6.3 Mesurage des niveaux de pression acoustique
    11
  • 6.4 Gamme de fréquences des mesurages
    12
  • 6.5 Données d'indices de réverbération
    12
  • 6.6 Fidélité
    15
  • 7 Expression des résultats
    15
  • 7.1 Isolement aux bruits aériens
    15
  • 7.2 Transmission du bruit de choc
    15
  • 7.3 Niveau de pression acoustique des équipements techniques
    16
  • 8 Rapport d'essai
    16
  • Annexe A (informative) Formulaires pour l'expression des résultats
    18
  • Annexe B (normative) Conditions et cycles de fonctionnement pour le mesurage du niveau de pression acoustique maximal et du niveau de pression acoustique continu équivalent
    24
  • Bibliographie
    31
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ