NF EN ISO 10140-4

NF EN ISO 10140-4

March 2013
Standard Cancelled

Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements

ISO 10140-4:2010 specifies the basic measurement procedures for airborne and impact sound insulation in laboratory test facilities.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2013

Number of pages

25 p.

Reference

NF EN ISO 10140-4

ICS Codes

17.140.01   Acoustic measurements and noise abatement in general
91.120.20   Acoustics in building. Sound insulation

Classification index

S31-049-4

Print number

1 - 20/02/2013

International kinship

ISO 10140-4:2010

European kinship

EN ISO 10140-4:2010
Sumary
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements

ISO 10140-4:2010 specifies the basic measurement procedures for airborne and impact sound insulation in laboratory test facilities.

Replaced standards (9)
NF EN ISO 140-1
December 1997
Standard Cancelled
Acoustics. Measurement of sound insulation in buildings and of building elements. Part 1 : requirements for laboratory test facilities with suppressed flanking transmission.

NF EN ISO 140-1/A1
July 2005
Standard Cancelled
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1 : requirements for laboratory test facilities with suppressed flanking transmission - Amendment 1 : specific requirements on the frame of the test opening for lightweight twin leaf partitions

L'évaluation des résultats d'un essai interlaboratoire européen réalisé en 1998 a montré que les exigences indiquées dans l'EN ISO 140-1 étaient insuffisantes pour les cloisons à doubles parements légers. L'annexe qui suit est par conséquent ajoutée.

NF EN ISO 140-3
August 1995
Standard Cancelled
Acoustics. Measurement of sound insulation in buildings and of building elements. Part 3 : laboratory measurements of airborne sound insulation of building elements.

NF EN ISO 140-3/A1
July 2005
Standard Cancelled
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3 : laboratory measurements of airborne sound insulation of building elements - Amendment 1 : installation guidelines for lightweight twin leaf partitions

L'évaluation des résultats d'un essai interlaboratoire européen réalisé en 1998 a montré que les exigences indiquées dans l'ISO 140-3 étaient insuffisantes pour les cloisons à doubles parements légers. L'annexe qui suit est par conséquent ajoutée.

NF EN ISO 140-6
December 1998
Standard Cancelled
Acoustics. Measurement of sound insulation in buildings and of building elements. Part 6 : laboratory measurements of impact sound insulation of floors.

Le présent document spécifie une méthode de laboratoire pour le mesurage de la transmission du bruit de choc par les planchers nus ou recouverts d'un revêtement, en utilisant une machine à chocs normalisée.

NF EN ISO 140-8
December 1997
Standard Cancelled
Acoustics. Measurement of sound insulation in buildings and of building elements. Part 8 : laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor.

NF EN 20140-10
April 1993
Standard Cancelled
Acoustics. Measurement of sound insulation in building and building elements. Part 10 : laboratory measurement of airborne sound insulation of small building elements.

NF EN ISO 140-11
December 2005
Standard Cancelled
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11 : laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors

ISO 140-11:2005 specifies methods for measuring the acoustic properties of floor coverings from the viewpoint of reducing impact sound transmission. The purpose of ISO 140-11:2005 is to establish a method for determining the impact sound insulation of a floor covering under standard test conditions. The test is limited to the specification of procedures for the physical measurement of sound originating from an artificial impact source (tapping machine) under laboratory conditions and is not directly related to the subjective significance of the results. In ISO 140-11:2005, a test method is described using the standard tapping machine to simulate impact sources like human footsteps with shoes. In addition, methods using a modified tapping machine and a heavy/soft impact source are also introduced in informative Annexes C and E for the assessment of impact sound insulation of a floor covering against impact sources with strong components at low frequencies, such as human footsteps or children jumping. As a simplified method for the measurement of the reduction of floor impact sound pressure level by soft and resilient floor coverings, the method using a wooden mock-up floor is introduced in Annex D. ISO 140-11:2005 is applicable to all floor coverings, whether single or multi-layered, as installed on lightweight floors. In the case of multi-layered coverings, they can be factory-assembled or assembled at the test site. The test method is applicable only to laboratory measurements. It does not contain any provision that permits an assessment of the effectiveness of a floor covering in situ.

XP S31-079
April 2000
Standard Cancelled
Acoustics - Measurement of the sound insulation capacity of structural parts and of the insulation of appartment buildings - Laboratory measurement of the airborne noise efficiency of backing wall devices

Le présent document spécifie une méthode de laboratoire pour le mesurage des propriétés d'isolation aux bruits aériens des dispositifs de doublage de paroi. La méthode s'applique à tous les ouvrages et produits utilisés en doublage de paroi horizontale ou verticale.

See more
Standard replaced by (1)
NF EN ISO 10140-4
May 2021
Standard Current
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements

This document specifies the basic measurement procedures for airborne and impact sound insulation of building elements in laboratory test facilities.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Modes opératoires de mesurage et exigences
    2
  • 5 Mesurages de l'isolation acoustique
    8
  • Annexe A (informative) Modes opératoires supplémentaires pour les mesurages à basses fréquences
    11
  • Bibliographie
    13
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ