NF EN ISO 10848-4

NF EN ISO 10848-4

December 2017
Standard Current

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4 : Application to junctions with at least one Type A element

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.ISO 10848-4:2017 specifies laboratory and field measurements of buildings where at least one of the elements that form the construction under test is a Type A element (defined in ISO 10848‑1).Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results are primarily representative of the performance of that junction when installed in that particular building structure.The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2017

Number of pages

18 p.

Reference

NF EN ISO 10848-4

ICS Codes

91.120.20   Acoustics in building. Sound insulation

Classification index

S31-097-4

Print number

1

International kinship

ISO 10848-4:2017

European kinship

EN ISO 10848-4:2017
Sumary
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4 : Application to junctions with at least one Type A element

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.

ISO 10848-4:2017 specifies laboratory and field measurements of buildings where at least one of the elements that form the construction under test is a Type A element (defined in ISO 10848‑1).

Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results are primarily representative of the performance of that junction when installed in that particular building structure.

The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2.

Replaced standards (1)
NF EN ISO 10848-4
August 2013
Standard Cancelled
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4 : application to junctions with at least one heavy element

ISO 10848-4:2010 specifies laboratory measurements of normalized flanking level difference, normalized flanking impact sound pressure level or vibration reduction index of buildings where at least one of the elements that form the construction under test is not a light element. ISO 10848-4:2010 applies to T- or X-junctions.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Appareillage
  • 6 Configuration d'essai
  • 7 Modes opératoires d'essai
  • 8 Fidélité La méthode de mesure doit permettre d'obtenir une répétabilité satisfaisante. Cela est déterminé conformément à la méthode donnée dans l'ISO 12999-1 et doit être vérifié périodiquement, en particulier quand une modification est apportée au mode opératoire ou à l'appareillage.
  • 9 Expression des résultats
  • 10 Rapport d'essai
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ