NF EN ISO 11117

NF EN ISO 11117

December 2019
Standard Current

Gas cylinders - Valve protection caps and guards - Design, construction and tests

This document specifies the requirements for valve protection caps and valve guards used on cylinders for liquefied, dissolved or compressed gases.Valve protection caps and valve guards are some of the options available to protect cylinder valves, including valves with integral pressure regulators (VIPRs) during transport.This document is applicable to valve protection caps and valve guards which inherently provide the primary protection of a cylinder valve. It can also be used to test other equipment (e.g., handling devices) attached to cylinder packages, even in cases where the cylinder valve is inherently able to withstand damage without release of the content.This document excludes protection devices for cylinders with a water capacity of 5 l or less and cylinders whereby the protection device is fixed by means of lugs welded or brazed to the cylinder, or is welded or brazed directly to the cylinder. This document does not cover valve protection for breathing apparatus cylinders.NOTE Small cylinders (e.g., medical cylinders) are commonly transported in an outer-packaging (e.g., pallet) to meet transport regulations.This document does not specify requirements that could be necessary to enable the valve protection device to be used for lifting the cylinder.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2019

Number of pages

26 p.

Reference

NF EN ISO 11117

ICS Codes

23.020.35   Gas cylinders

Classification index

E29-691

Print number

1

International kinship

ISO 11117:2019

European kinship

EN ISO 11117:2019
Sumary
Gas cylinders - Valve protection caps and guards - Design, construction and tests

This document specifies the requirements for valve protection caps and valve guards used on cylinders for liquefied, dissolved or compressed gases.

Valve protection caps and valve guards are some of the options available to protect cylinder valves, including valves with integral pressure regulators (VIPRs) during transport.

This document is applicable to valve protection caps and valve guards which inherently provide the primary protection of a cylinder valve. It can also be used to test other equipment (e.g., handling devices) attached to cylinder packages, even in cases where the cylinder valve is inherently able to withstand damage without release of the content.

This document excludes protection devices for cylinders with a water capacity of 5 l or less and cylinders whereby the protection device is fixed by means of lugs welded or brazed to the cylinder, or is welded or brazed directly to the cylinder. This document does not cover valve protection for breathing apparatus cylinders.

NOTE Small cylinders (e.g., medical cylinders) are commonly transported in an outer-packaging (e.g., pallet) to meet transport regulations.

This document does not specify requirements that could be necessary to enable the valve protection device to be used for lifting the cylinder.

Replaced standards (1)
NF EN ISO 11117
October 2008
Standard Cancelled
Gas cylinders - Valve protection caps and valve guards - Design, construction and tests

ISO 11117:2007 specifies the requirements for valve protection caps and guards for gas cylinders. ISO 11117:2007 defines tests for checking the mechanical strength and physical properties of the valve protection cap or valve guard. ISO 11117:2007applies to protection devices for valves used on cylinders for liquefied, dissolved or compressed gases. It excludes protection devices for cylinders with a water capacity of 5 l or less and cylinders whereby the protection device is fixed by means of lugs welded or brazed to the cylinder, or is welded or brazed directly to the cylinder. This International Standard does not cover valve protection for breathing apparatus cylinders. ISO 11117:2007 does not specify all the requirements that may be necessary to enable the valve protection device to be used for lifting the cylinder.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Exigences générales pour les chapeaux fermés et les chapeaux ouverts de protection de robinets
  • 5 Exemples illustrant les dispositifs de protection de robinets
  • 6 Matériaux
  • 7 Essais de type
  • 8 Marquage
  • 9 Rapport d'essai
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ