NF EN ISO 14555

NF EN ISO 14555

July 2014
Standard Cancelled

Welding - Arc stud welding of metallic materials

ISO 14555:2014 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.ISO 14555:2014 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.ISO 14555:2014 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2014

Number of pages

76 p.

Reference

NF EN ISO 14555

ICS Codes

25.160.10   Welding processes

Classification index

A89-600

Print number

1

International kinship

ISO 14555:2014

European kinship

EN ISO 14555:2014
Sumary
Welding - Arc stud welding of metallic materials

ISO 14555:2014 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.

ISO 14555:2014 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.

ISO 14555:2014 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

Replaced standards (1)
NF EN ISO 14555
February 2007
Standard Cancelled
Welding - Arc stud welding of metallic materials

ISO 14555:2006 covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds. ISO 14555:2006 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality. ISO 14555:2006 has been prepared in a comprehensive manner, with a view to its being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

Standard replaced by (1)
NF EN ISO 14555
August 2017
Standard Current
Welding - Arc stud welding of metallic materials

ISO 14555:2017 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds. ISO 14555:2017 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality. NOTE General quality requirements for fusion welding of metallic materials are given in ISO 3834‑1, ISO 3834‑2, ISO 3834‑3, ISO 3834‑4 and ISO 3834‑5. ISO 14555:2017 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction (see Annex B). For processing of stud welding, see Annex A.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles et termes abrégés
  • 5 Revue technique
  • 6 Personnel en soudage
  • 7 Matériel
  • 8 Planification de la production
  • 9 Descriptif de mode opératoire de soudage (DMOS)
  • 10 Qualification du mode opératoire de soudage
  • 11 Contrôles, examens et essais
  • 12 Critères d'acceptation
  • 13 Conditions d'exécution
  • 14 Contrôle du processus
  • Annexe B(normative) Exigences de qualité en soudage des goujons
  • Annexe A(informative) Mise en oeuvre du soudage des goujons
  • Annexe C(informative) Descriptif de mode opératoire de soudage (DMOS) du fabricant
  • Annexe D(informative) Procès-verbal de qualification d'un mode opératoire de soudage (PV-QMOS) (pour le soudage à l'arc des goujons par fusion et forgeage avec bague en céramique ou gaz de protection et du soudage à l'arc avec cycle court)
  • Annexe E(informative) Procès-verbal de qualification d'un mode opératoire de soudage (PV-QMOS) (pour le soudage à l'arc des goujons par décharge de condensateur par fusion et forgeage et du soudage à l'arc des goujons par décharge de condensateur avec amorçage par contact)
  • Annexe F(informative) Résultats d'essai - Essai de production (pour le soudage à l'arc des goujons par fusion et forgeage avec bague en céramique ou gaz de protection et du soudage à l'arc avec cycle court)
  • Annexe G(informative) Résultats d'essai - Essai de production (pour le soudage à l' arc des goujons par décharge de condensateur par fusion et forgeage et du soudage à l'arc de goujons par décharge de condensateur avec amorcage par contact)
  • Annexe H(informative) Exemple de rapport de surveillance de production
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ