NF EN ISO 4628-3

NF EN ISO 4628-3

March 2016
Standard Cancelled

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting

ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2016

Number of pages

25 p.

Reference

NF EN ISO 4628-3

ICS Codes

87.040   Paints and varnishes

Classification index

T30-140-3

Print number

1

International kinship

European kinship

EN ISO 4628-3:2016
Sumary
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting

ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.

The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.

NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.

NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.

NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).

ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.

Replaced standards (1)
NF EN ISO 4628-3
May 2004
Standard Cancelled
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting

ISO 4628-3:2003 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards. The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust. NOTE 1 The pictorial standards have been selected from the European rust scale published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the European rust scale is given in an annex. NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610, Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces, is also given in an annex.

Standard replaced by (1)
NF EN ISO 4628-3
November 2024
Standard Current
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting

This document specifies methods for assessing the degree of rusting of surfaces coated with paints and varnishes (organic coatings), and metallic coating plus an organic coating (duplex system), by comparison with pictorial standards. The pictorial standards provided in this document show surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible under-rusting. The assessment of the degree of rusting in this document is only an estimation of the affected area on specimen. Edges are not included.

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Évaluation
  • 5 Expression des résultats
  • 6 Rapport d'essai
  • Annexe A Images pour l'étalonnage
  • Annexe B Correspondance entre le système d'évaluation ISO et d'autres systèmes
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ